Manual Unold Trimmy Exclusive (page 12 of 44) (English, German, Dutch, French, Italian, Polish, Spanish)

484994

Zoom out

Zoom in

1/44

nOSe anD ear trImmer OPeratIOn

1. Prepare the appliance as described in the

chapter „Before first use“.

2. Remove the protection cap from the

appliance.

3. Check if the nose and ear trimmer

attachment is attached to the appliance.

4. Switch the appliance on using the „EIN/

AUS“ [ON/OFF] switch.

5. Move the attachment carefully and slowly

towards or into the nose or ear.

6. Please bear in mind that the appliance

should never be inserted more than 5 mm

in nose or ear to avoid injuries. Do not force

the appliance when inserting it.

7. Slowly move the appliance in circles to

remove all unwanted hair.

8. After finishing the hair cut, switch the

appliance off pushing the button EIN/AUS

[ON/OFF].

9. Clean the appliance after every use.

10. Reattach the protection cap and store all

parts in the appliance holder.

InSertIng Or exchangIng Battery

1. Switch the appliance off using the „EIN/

AUS“ [ON/OFF] switch.

2. Turn the battery compartment cover to open.

3. Detach the battery compartment cover from

the appliance.

4. Remove the empty battery.

5. Insert a 1.5 V Mignon battery in the bat-

tery compartment. Make sure the poles

are correctly orientated as otherwise the

appliance will not work.

6. Reattach the battery compartment cover

and turn to close.

7. Used batteries must not be disposed of

in the household waste. Dispose of the

batteries at your specialist dealer for electric

devices or the local collection point.

BearD trImmer OPeratIOn

1. Prepare the appliance as described in the

chapter „Before first use“.

2. Remove the protection cap from the appli-

ance.

3. Check if the beard trimmer attachment is

attached to the appliance.

4. Switch the appliance on using the „EIN/

AUS“ [ON/OFF] switch.

5. Carefully place the appliance on the skin

and cut the hair to the desired length. Do

not use pressure on the appliance.

6. Contour trimming: Carefully cut the hair

according to the desired contour.

7. Make sure that the shaving head is always in

contact with the skin. Shaving will be easier,

when you tense the skin with your free hand.

8. If hair gets caught in the shaving head,

switch the appliance off and clean the

shaving head as described in the chapter

„Cleaning and care“.

9. After finishing the hair cut, switch the

appliance off pushing the button EIN/AUS

[ON/OFF].

10. Clean the appliance after every use.

11. Directly after shaving do not use any care

products that contain alcohol as these may

cause skin irritation. Use mild care lotions

or creams instead.

12. Reattach the protection cap and store all

parts in the appliance holder.

To obtain perfect results, always work against the direction of hair growth. Shaving will be easier if

you tense the skin of the part you want to shave with your free hand. After shaving we recommend

to cream the depilated parts with a mild body lotion in order to avoid skin irritation. If you have

sensitive skin or depilate sensitive parts, we recommend you to treat these parts only once in order

to avoid skin irritation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold Trimmy Exclusive in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold Trimmy Exclusive Manual

Product: