485000
11
Zoom out
Zoom in
Previous page
1/36
Next page
11
cleanIng anD care
1. Unplug the appliance from the wall socket.
2. Let the appliance cool off completely placing it
on a heat resistant surface.
3. Never immerse the appliance or the lead
cable in water or other liquids to clean them.
4. Clean the appliance with a damp cloth.
5. Do not use any scrubbing sponges,
abrasive agents, steel wool, metal objects,
disinfectants or hot cleaning agents, since
they can damage the appliance.
6. Protect the appliance from dust and clean
the air inlets with a soft brush, if necessary.
7. Clean the straightener plates with a damp
cloth, if necessary. Let the attachments
dry completely before using them again or
storing them.
Storage
1. Unplug the appliance from the wall socket.
2. Let the appliance cool off completely placing it
on a heat resistant surface.
3. To avoid damage to the lead cable, never
wrap it around the appliance.
4. Separate the combed hair into strands no
more than 5 cm wide. If necessary, separate
the strands using hair clips.
5. Switch the appliance on pushing the button
EIN/AUS [ON/OFF]. The indicator light
lights up red.
6. Heat the appliance up for approx.
90 seconds in order to achieve the best
styling result.
7. Open the appliance and place a small
section of hair between the straightening
plates close to the root.
8. Shut the appliance.
9. Now work your way down slowly and evenly
to the ends of your hair. Maintain the
appliance firmly closed during this process.
Never work the same part for more than two
seconds to avoid damaging your hair. For
an even and straight look, work your way
straight down keeping the appliance close
to your head. Working your way through
slightly lifting the appliance will give your
hair more volume.
10. Please remember that the straightener
plates are very hot after use.
11. Always switch the appliance off using
the EIN/AUS [ON/OFF] switch before
disconnecting the plug from the wall socket.
12. TIP: You can also curl your hair with the
straightener! Place the strand between the
plates as usual and straighten your hair.
Shortly before the ends of your hair, turn
the appliance to the inside or the outside
(according to the desired look) to give your
hair a gentle movement to inside or the
outside.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold Traveller Mini Modell 87605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold Traveller Mini Modell 87605 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info