496296
15
Zoom out
Zoom in
Previous page
1/74
Next page
13
Attach the set of plates which you intend to 1.
use by pressing the plates into the hinge. The
sliding holders will slightly move to the front.
Put the plug into the socket (power supply 2.
230 V). and turn the temperature button to
the desired position between MIN and MAX.
The red control lamp turns on and keeps on
lighting as long as the appliance is connected
to the power.
Use the preheating phase of the Multi 3 in 3.
1 (approx. 5 minutes) to prepare the ingre-
dients.
As soon as the required temperature is rea-4.
ched, the green control lamp turns on. This
lamp will always turn on, when the required
temperature is reached and turns off, when
the temperature has fallen and the appliance
is heating again.
Before the rst use, grease the plates with5.
some oil or butter.
Now place either6.
the prepared sandwiches on the sand-•
wich moulds, or
llthedoughintothewafeplates,or•
placethefoodtobegrilledontherifed•
grill plate.
Close the lid. When preparing sandwiches, 7.
also close the handle locking!
To keep the prepared snacks warm, reduce 8.
the heat to MIN, but keep always in mind that
the snacks will get dry after a certain time.
Unplug the appliance before cleaning and let 1.
it cool down.
Remove the cooled plates by pulling the 2.
sliding device to the front, the plate will jump
up.
If some fat should have dripped inside the ap-3.
pliance, wait until it is lukewarm and wipe it
away with a kitchen paper.
The aluminium diecast plates can be cleaned 4.
either in the dishwasher or by hand. Discolora-
tions may occur in the dishwasher and do not
represent a risk or a reason for complaint.
In case of strong crusts, soak the plates over-5.
night.
Use a damp cloth for cleaning of the housing.6.
Do not use any scouring or corroding agents 7.
or oven cleaners.
All parts must be dried before reassembling 8.
the appliance.
For vertical storage wind the cable around the 9.
cable storage in the bottom.
Before assembling the appliance remove all 1.
packing materials.
Check if all parts are complete.2.
Wipe the removable parts with a damp cloth 3.
or clean it in warm soapy water. Dry the parts
carefully
Wipe the housing with a damp cloth. Make 4.
sure that no water can penetrate into the hou-
sing.
Put the plug into a socket.5.
Grease the plates slightly and preheat the 6.
empty appliance for about 10 minutes. Then
wipe the plates with a damp cloth.
Thersttoast/wafeshouldnotbeusedand7.
should be thrown away.
For further used the plates must not be 8.
greased any more (except if provided in the
recipe).
The appliance is now ready for being used.9.
BEFORE FIRST USE
USE OF THE APPLIANCE
CLEANING AND MAINTENANCE
The appliance is provided for domestic use only.
The manufacturer does not assume any warranty in case of improper, incorrect or commercial use
or after repair by unauthorized third parties.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold Multi 3-in-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold Multi 3-in-1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info