485009
12
Zoom out
Zoom in
Previous page
1/44
Next page
12
oPeratIon
1. Prepare your hair as described in the chapter
„Before first use“.
2. Attach the curling brush firmly to the
appliance until it latches into place.
3. Connect the plug to a wall socket.
4. Separate the combed hair into strands no
more than 5 cm wide. If necessary, separate
the strands using hair clips.
5. Wrap the hair strands around the curling
brush from the end to the hairline. In order
not to entangle the hair it should not be
wrapped around the brush more than twice.
6. Switch the appliance on using the EIN/AUS
(ON/OFF) switch and select the desired
temperature. The following settings may be
selected:
0 = off
= cool air setting to fix styling
1 = soft warm air stream for easy styling
2 = strong air stream for fast styling and
drying
7. Leave the strand wrapped up until it feels
warm.
8. The strand achieves more hold if you fix the
styling using the cool shot.
9. Press the unroll button to easily unwrap the
strand.
10. Unwrap the strand carefully to separate it
from the appliance as the brush now moves
freely.
11. Repeat steps 5 to 10 to style the remaining
strands.
12. Always switch the appliance off using
the EIN/AUS (ON/OFF) switch before
disconnecting the plug from the wall socket.
13. Before styling your hair with a comb, a
brush or your fingers, let it cool for a while.
14. Please remember that the curling brush is
very hot after use. Danger of burns!
Attention: The appliance becomes very
hot during operation and maintains
the heat during some time after
disconnection.
cleanIng anD care
1. Unplug the appliance from the wall socket.
2. Leave the appliance and the curling brush
to cool off completely putting it on a heat
resistant surface.
3. Never immerse the appliance or the lead
cable in water or other liquids to clean them.
4. Clean the appliance with a damp cloth.
5. Do not use any scrubbing sponges,
abrasive agents, steel wool, metal objects,
disinfectants or hot cleaning agents, since
they can damage the appliance.
6. Protect the appliance from dust and clean
the air inlets with a soft brush, if necessary.
7. Clean the curling brush with a damp cloth,
if necessary.
8. Let the curling brush dry completely before
using it again or storing it.
Voltage commutatIon
Before connecting the appliance please check if the voltage selector is adjusted to the right voltage
(120/230-240 V~). To change the selection a coin may be used.
beFore FIrSt uSe
1. Remove all packaging materials and any
transport safety devices. Keep packaging
material out of reach of children. Danger of
suffocation!
2. After washing your hair, dry it thoroughly
with a towel.
3. Best results are achieved with dry hair.
Therefore you should dry your hair well
using a hair dryer, if necessary.
4. Brush your hair until it falls loosely.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold Curly Traveller Modell 87405 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold Curly Traveller Modell 87405 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info