484951

Unold 8875 Manual

17
Zoom out
Zoom in
Previous page
1/60
Next page
17
14. Approx. 2 minutes later the freezing is turned
on and the red control light turns on.
15. The display shows alternatingly the
remaining preparationt ime and the actual
temperature of the cooling bowl.
16. During operation, the appliance can be
stopped at any time by pressing the START/
STOP button for at least 2 seconds.
17. During operation the freezing time can
be extendeed by pressing the time select
button (Zeitwahl) in steps of 5 minutes up
to a max. freezing time of 50 minutes.
18. The appliance turns off automatically after
the preselected time. Ten beeps will sound.
The display shows „0:00“. The ice cream
can be taken out.
19. If the ice cream is still too soft, you can
restart the appliance by pressing the START/
STOP button for at least 2 seconds. Select
the desired additional freezing time with the
time select button (Zeitwahl). Then press
the START/STOP button. The appliance will
restart for the preselected time and will then
return into the initial mode.
20. If the ice is not taken out within 10 minutes
after the beeps, the automatic freezing
function is activated to avoid the ice cream
from melting.
21. This function cools the ice cream in steps
of 10 minutes for max. 1 hour. Then the
appliance returns into the starting mode.
22. Switch off and unplug the appliance before
taking out the ice cream.
23. To take out the ice cream first remove the
motor block und then the transparent lid by
turning it counterclockwise.
24. Take the ice cream bowl out and remove the
mixer from the ice cream.
25. Fill the ice cream into an appropriate
freezing container with lid. Do not use any
sharp tools, but preferably plastic or wood
spoons or spatulas.
26. You can now prepare new icecream, just
restart at point 1 of this chapter.
coolinG function for Bottles
1. For rapid cooling of bottles remove the ice
cream bowl (4) and place the bottle directly
into the recess (6).
2. Select a short operation time 10 minutes
and start the appliance. If necessary the
cooling time can be prolonged as described
above.
3. The best cooling effect will be reached, if
the bottle top is covered with an isolating
collar. However, do not cover the ventila-
tion openings of the motor block and the
compressor housing.
1. Switch off and unplug the appliance. Let the
appliance cool down.
2. Do not clean the appliance, the motor block
and the cord in or under water or any other
liquid.
3. Do not use any sharp or scouring clean-
4. sers which might damage the surface.
5. All removable parts except the motor block
can be cleaned in warm soapy water. The
parts are not dishwasher proof.
6. The compressor housing and the motor
block can be wiped with a damp cloth.
7. Dry all parts carefully before reassembling
the appliance.
cleaninG
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 8875 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 8875 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info