715602

Unold 87813 Manual

18
Zoom out
Zoom in
Previous page
1/48
Next page
18
CLIPPER OPERATION
1. Prepare the appliance as described in the chapter „Before first use“ and
„Charging“.
2. Make sure that skin and hair are clean and dry before you start using the
appliance. The hair should furthermore be combed in order to recognise the
direction of hair growth.
3. Check if the desired comb is attached to the appliance.
4. The adjustment wheel (2) allows adjusting the desired hair length to five
positions.
Pos. Desired hair length in mm
Comb attachment, small Comb attachment, big
1 18 32
2 15 29
3 12 26
4 9 23
5 6 20
5. Start with the longest adjustment and, if necessary, carry out a test cut at a
hidden part of the body.
6. Switch the appliance on pushing the button EIN/AUS [ON/OFF].
7. Place the comb on the skin and work against the direction of hair growth,
if possible.
8. Cut the hair to the desired length. It is recommended to shorten long hair
with scissors first. Therefore scissors and comb are included in the supply.
9. While cutting your hair with the appliance, stop from time to time and check
the result to ensure that you do not shorten your hair too much.
10. In case you want to thin out your hair, use the thin-out feature. Push the
switch (3) to the right. Now you can use the appliance as usual, but your
hair will only be thinned out. To switch this feature off, push the switch to
the left again.
11. If hair gets caught in the shaving head, switch the appliance off and clean
the shaving head as described in the chapter „Cleaning and care“.
11. Only charge the appliance when the accumulators are completely empty.
This ensures that the performance of the accumulators lasts longer.
12. You may also connect the lead cable directly to the appliance, when the
accumulators are completely empty and you have not yet finished shaving.
Connect the lead cable to the plug socket in the lower part of the appliance
and connect the mains adapter to the wall socket.
13. Attention: Never connect the appliance to the mains without the accumulators
inserted.
Copyright UNOLD AG | www.unold.de
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 87813 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 87813 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info