715582
20
Zoom out
Zoom in
Previous page
1/64
Next page
20
OPERATION
USB charger plugged into the mains supply. The appliance must only be used in battery-
powered operation!
Please do not use any chemical hair styling products, such as hair spray, before
straightening your hair, to avoid burning your hair. On the other hand, use of heat
protection products for the hair is recommended.
Attention: The appliance becomes extremely hot during operation! There is
danger of burn injuries if there is direct skin contact.
1. Open the appliance by pressing the button for the safety locking mecha-
nism.
2. Switch on the appliance via the “ON/OFF” button. The indicator light is
illuminated.
3. Via the “+” and “-” buttons set the desired temperature. The temperature
can be set in 3 three increments from 160°C, 185°C or 205°C. The thicker
your hair the higher the selected temperature can be. Chemically-treated
hair should be straightened at a lower level.
4. The indicator light flashes as long as the appliance is heating up. As soon as
the flashing goes out, the desired temperature is reached.
5. Divide the combed hair into small strands that should not be wider than five
centimetres. If necessary separate the hair strands with a bobby pin.
6. Open the appliance and place a strand of hair on the hair placement surface
between the two straightening plates.
7. Close the appliance.
8. Now move the appliance slowly and uniformly downward to the tips of the
hair. In this process always keep the firmly appliance closed. You should
never keep the appliance longer than two seconds at any point, so as not
to damage your hair. If you want to get a smooth, tight-fitting look, when
smoothing the hair strands you must always work close to the head. However
if you lift the appliance when straightening you get a lot of volume.
9. Determine the temperature that offers the best results for you through trial.
10. The charge status indicator informs you of the actual charging status of the
appliance. Indication occurs at 50%, 70% and 100%. The appliance must
be recharged as soon as the display for 50% lights up. If all three displays
are flashing the appliance can no longer be used until it has been recharged.
11. Please bear in mind that the straightening plates are also still extremely
hot after use.
Copyright UNOLD AG | www.unold.de
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 87625 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 87625 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info