716015
27
Zoom out
Zoom in
Previous page
1/104
Next page
27
1. Before assembling, ensure that you are assembling the appliance in a place
that is level and dry.
2. Remove all packaging materials and transport safeguards. Keep the
packaging material, such as plastic bags or Styrofoam away from small
children - danger of suffocation!
3. Check whether all needed parts are present.
4. If necessary, unscrew the screws (10) slightly out of the base.
5. Precisely insert the stand tube (8) into the base and fasten it with the three
screws (firmly tighten the screws clockwise).
6. Fit the operating element (7) onto the stand tube (8). In this process, ensure
that the lower end of the operating element fits precisely onto the holes
intended for this purpose. Fix the two components in place with the screw.
7. You can adjust the desired height by unscrewing the fixing screw, sliding
the tube to the desired height, and fixing it in place with the fixing screw.
8. Fasten the rear basket cover (6) on the motor housing (7), by fixing the cover
in place with the nut (5).
9. Place the impeller (4) on the axle on the motor housing (7). Fix the impeller
(4) in place with the nut (3). Caution: Left-hand thread!
10. Connect the front basket cover (2) to the rear basket cover (6). Check
whether the fastening ring (1) is in the right position (both halves of the
basket must sit precisely in the ring) and fix them in place with the clamp.
11. Check whether all parts have been correctly assembled and fixed in place.
POWERBANK/RECHARGEABLE BATTERY
1
3
4
6
5
1 LEDs – charge status
2 Operating button
3 USD charging input
4 USD charging output
5 Connection, interface –
fan
6
LED/torch
2
Copyright UNOLD AG | www.unold.de
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 86870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 86870 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info