Manual Unold 86706 (page 22 of 72) (English, German, Dutch, French, Italian, Polish, Spanish)

623315

Zoom out

Zoom in

1/72

3. Fix the lower stand pipe in place

on the base by inserting it into the

opening in the base and firmly

screwing it in.

4. Route the power cord through the

base and the lower stand pipe, so

that the power cord projects on

the upper end of the stand pipe

5. Note that the plug for the electri-

cal outlet must poke out on the

underside of the base. The end of

the power cord, on which the con-

nection socket is mounted, must

be threaded through the pipe.

6. Check whether the upper stand

pipe is completely pulled out. If

not, unscrew the locking ring, pull

the pipe out to its complete size

and screw fasten the locking ring.

7. Thread the power cord through

the upper stand pipe. Now screw

the upper stand pipe firmly onto

the lower stand pipe.

8. Connect the power cord socket on

the reflector. Then carefully place

the reflector on the upper stand

pipe. Use the provided screws

(M4x8) to fasten the reflector.

After you have connected plug and

socket, place the black protective

cap around both plug and socket

and lock the protective cap.

9. Slide the upper stand pipe to the

desired height and fix it in place

at this height by firmly tightening

the locking ring. Caution: This

procedure is only possible if you

have properly complied with point

6, otherwise the power cord in the

interior of the pipe is too short.

10. The power cord must now be fixed

in place on the underside of the

base. To do this, use the screws

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 86706 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 86706 Manual

Product: