Manual Unold 86410 (page 17 of 52) (English, German, Dutch, French, Italian, Spanish)

484977

Zoom out

Zoom in

1/52

preparing THe appLiance For operaTion

1. Ensure that you have selected a safe loca-

tion.

2. Comply with all safety instructions and

safety regulations.

3. Plug the mains plug of the appliance into an

electrical outlet (220-240 V ~ 50 Hz)

4. Select the desired temperature level on the

rotary regulator.

 Heating mode

„Low „for lower heating temperatures

(1,200 watt)

„High“ for more heat (2,000 watt)

 Fan operation

“Cooler” for the fan function (cool air)

5. Then select the desired temperature on the

rotary thermostat regulator. The regulator is

variably adjustable.

6. The appliance heats until the desired tem-

perature is reached, then the appliance

switches off. The appliance will switch on

again as soon as the room temperature

drops below the set temperature.

7. When you adjust the fan function, you must

place the rotary thermostat regulator on the

highest position.

8. To switch off the appliance, place the rotary

regulator on the OFF position.

9. Always switch off the appliance after use

by placing the rotary regulator in the OFF

position, and unplug the appliance from the

electrical outlet.

    







oVerHeaTing proTecTion circuiT

1. The appliance is equipped with an overhe-

ating protection circuit that switches the

appliance off when it is heated over 70°C.

2. If the overheating protection circuit has

been tripped, switch the appliance off,

unplug the plug from the electrical outlet

and let the appliance cool for at least 10

minutes.

3. Eliminate the cause of the overheating, (e.g.

excessive dust in the appliance, air outlet

grille is covered) and start up the appliance

again.

4. If after eliminating the cause, you still can-

not switch the appliance back on, or if the

overheating protection circuit switches on

without an apparent reason, contact our

customer service organisation.

cLeaning anD care

1. 

2. 

3. 

4. Never use any abrasive scouring agents,

steel wool, metal objects, hot cleaning

agents or disinfectants.

5. You can remove dust in the appliance if you

carefully hold a vacuum cleaner against the

air inlet and outlet grille.

6. Store the fan heater in a dry, safe place so

that it is protected from dust, shocks, heat

and moisture.

oSciLLaTion FuncTion / Swing FuncTion

1. With this function it is pos-

sible to distribute the air flow

over a larger area, because

the appliance swings back

and forth in a specific radius.

2. The oscillation function

can be switched on in every mode. To do

this, press the “Swing” button on the rear

of the appliance.

3. If you want to stop the appliance in a speci-

fic position, press the “Swing” button again.

4. Switch off the oscillation function before

you switch off the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 86410 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 86410 Manual

Product: