716006
24
Zoom out
Zoom in
Previous page
1/68
Next page
24 von 68
Stand 24.2.2020
DE
EN
FR
NL
IT
ES
PL
PREPARING THE APPLIANCE FOR OPERATION
1. Comply with all safety instructions and safety regulations.
2. Ensure that you have selected a safe location.
3. Plug the mains plug of the appliance into an electrical outlet (220-240 V~
50/60 Hz).
4. Select the desired function on the rotary function regulator:
Heating operation
- Level “I” for less heat (approx. 1,000 watt)
- Level “II” for more head (approx. 2,000 watt)
For heating operation select the desired temperature via the rotary thermo-
stat regulator, by turning the regulator. The regulator is variably adjustable.
The indicator light shows the mode.
5. The appliance heats until the desired temperature is reached, then the
appliance switches off. The appliance will switch on again as soon as the
room temperature drops below the set temperature.
Fan operation
Level “ “ for the fan function (cool air)
Attention: If the appliance was previously on heating operation, the outflow-
ing air will still be warm initially. Depending on the previous heating capac-
ity it can take some time until the appliance provides cool air.
When you adjust the fan function, you must place the rotary thermostat
regulator on the highest position.
6. To switch off the appliance, place the rotary regulator on position “O” and
unplug the mains plug.
Be aware that the appliance can become very hot - fire hazard! Particularly
ensure that children are kept away from the appliance.
CLEANING AND CARE
Switch off the appliance. To switch off the appliance, place the
rotary regulator on position “O” and unplug the mains plug.
Allow the appliance to cool completely.
1. Never use any abrasive scouring agents, steel wool, metal objects, hot clean-
ing agents or disinfectants.
2. You can remove dust in the appliance if you carefully hold a vacuum cleaner
against the air inlet and outlet grille.
3. Store the fan heater in a dry, safe place so that it is protected from dust,
shocks, heat and moisture.
Copyright UNOLD AG | www.unold.de
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 86120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 86120 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info