Manual Unold 78866 (page 19 of 52) (English, German, Dutch, French, Italian, Polish, Spanish)

713072

Zoom out

Zoom in

1/52

Stand 11.3.2020

19 von 52

1. Place the food to be sliced on the carriage and press it slightly against the

rebate plate. The food must not contain any bones or other hard compo-

nents.

2. The appliance disposes of a safety lock. Press simultaneously the unlocking

device button and the ON/OFF button. The motor starts and you can start

slicing.

3. Push the carriage slowly against the rotating knife.

4. As soon as there is only a small part of food left, you have to use the rest

holder to avoid injuries. The appliance must not be used without carriage

and rest holder.

5. The knife rotates as long as both buttons are pressed down. Release both

switches to stop the machine and wait until the knife has stopped rotating.

6. When you have finished, adjust the thickness to „0“.

7. Please clean the appliance and in particular the knife immediately after cut-

ting fat food (e.g. cold meat, cheese etc.)

Caution! The knife is very sharp, risk of injuries!

OPERATION

3. Place the slicer on a flat, clean, solid, and dry surface.

4. Mount both parts of the carriage.

5. Insert the carriage into the guide. Hold it at a right angle and then tilt it

downward.

6. Place the rest holder on the carriage.

7. Put the plug into a power socket as per rating label.

8. Adjust the desired cutting thickness from 0–15 mm by turning the wheel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 78866 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 78866 Manual

Product: