484945

Unold 75014 Manual

15
Zoom out
Zoom in
Previous page
1/68
Next page
15
The manufacturer does not assume any warranty in case of improper or incorrect use or after repair by
unauthorized third parties.
13. The appliance becomes very hot during
operation. Do not touch any hot parts of the
appliance in order to avoid burns.
14. The released steam is also very hot. Avoid
any contact with the steam and never direct
the steam jet towards persons in order to
avoid burns.
15. The recently ironed clothes and the cover of
the ironing board may also become very hot
while ironing.
16. Do not place the appliance or lead cable
near open flames during operation.
17. Always use the appliance on a level,
uncluttered and heat-resistant surface.
18. Always switch the appliance off (turning
the rotary switch to „AUS/OFF“ before
disconnecting the plug from the wall
socket.
19. Always disconnect the lead cable from the
wall socket pulling on the plug, never on the
cable.
20. Always unplug the appliance even when you
leave the workplace for a short time and
before cleaning and let the appliance cool
off.
21. For safety reasons unplug the appliance
when filling the water tank directly from the
tap.
22. Never leave the appliance unattended when
it is connected to the wall socket.
23. When the appliance has cooled off, loosely
wrap the cable around the appliance before
storing.
24. Never open the casing of the appliance to
prevent electric shock.
25. Check the appliance, the wall socket and
the lead cable regularly for wear or damage.
In case the lead cable or other parts present
damages, please send the appliance or the
base to our after sales service for inspection
and repair (for address, see warranty terms).
Unauthorised repairs can constitute serious
risks for the user and void the warranty.
Attention: The Safety-Lift feature is an
additional feature that facilitates iro-
ning. Nevertheless, this is no release
from handling the appliance with the
corresponding care.
The appliance becomes very hot during
operation!
DESCRIPTION OF THE SAFETY-LIFT TECHNOLOGY
1. Put the iron on an even surface. Connect
the plug to a wall socket and check if the
switch for the Safety-Lift mode is adjusted
to „EIN/ON“.
2. As soon as you touch the handle of the
iron, the appliance lowers and you may
start ironing as usual. When you release
the handle, the Safety-Lift feature lifts the
appliance immediately. This avoids that
the hot iron soleplate damages to the cloth
being ironed.
Disconnecting the Safety-Lift mode
1. Cancel the mode by turning the switch to
„AUS/OFF“. The appliance now works like
a normal iron.
2. Even in this mode, an additional safety
device ensures that the appliance is lifted, if
the handle is not touched within 1 minute.
More information on the automatic shut-off
can be found on page 19.
Attention: The Safety-Lift feature is an
additional feature that facilitates iro-
ning. Nevertheless, this is no release
from handling the appliance with the
corresponding care.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 75014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 75014 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info