623316
29
Zoom out
Zoom in
Previous page
1/108
Next page
29
Mix
When the ingredients need to be
mixed evenly before starting the
programme, please choose this
programme selection before the
ice cream preparation. The ingre-
dients are mixed 60 minutes at
maximum. It is possible to change
the relevant time selection from
60 to 5 minutes by pressing the
buttons TIME + and TIME -. The
basic setting is 10 minutes.
14. Important: once you have selec-
ted a program, you cannot change
it while the program is running.
You then have to use the POWER
switch to switch the appliance off
and back on again. However, the
“Mix andFreeze” and “Mix” pro-
grams can be paused by pres-
sing the START/PAUSE button. If
you pause the program, the time
which was set will continue run-
ning. As soon as you press the
START/PAUSE button again, the
appliance will resume operation.
The “Freeze” program cannot be
paused.
15. Now press the START/PAUSE but-
ton. The appliance starts mixing
the ingredients.
16. The remaining time is shown on
the display.
17. During operation you can extend
the operating time by pressing the
Time + button in intervals of one
minute to a maximum of 60 minu-
tes.
18. After expiration of the set time the
appliance automatically switches
off and a signal beeps ten times.
The display shows 0:00.
19. If the ice cream is not removed
within 10 minutes after the “fini-
shed” signal, the automatic coo-
ling function switches on to pre-
vent the ice cream from melting.
20. The automatic cooling function
keeps the ice cream cold for a
maximum of one hour.
Remove ice cream
21. Before removing the ice cream
from the appliance, switch off the
appliance with the POWER switch
and unplug the power cord from
the electrical outlet.
22. Remove the transparent lid.
23. Remove the ice cream container
from the appliance and carefully
pull the mixer out of the container.
24. Transfer the ice cream to a suita-
ble container. Do not use sharp or
pointed objects for this; instead,
use a plastic or wooden spoon in
order not to damage the ice cream
container. We recommend using a
silicone dough scraper.
25. If desired, you can make more ice
cream right away. In this case,
start again with step number 1.
26. Tip: If you make fruit ice cream or
sorbet, remove the ice cream con-
tainer as soon as the program is
finished, transfer the ice cream to
a container suitable for freezing
and put this container in the free-
zer so that the ice cream freezes
completely. Otherwise, this ice
cream may be slightly soft inside,
even if it is firmly frozen on the
outside.
27. If you do not wish to make more
ice cream, switch the appliance
off with the POWER switch and
unplug it from the electrical out-
let.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 48890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 48890 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info