Manual Unold 48556 (page 13 of 44) (English, German, Dutch, French, Italian, Spanish)

110824

Zoom out

Zoom in

1/44

21. For safety reasons, never place the appli-

ance on hot surfaces, a metal tray or a wet

surface.

22. Do not place the appliance or lead cable

near open flames during operation.

23. Always use the popcornmaker on a level,

uncluttered and heat-resistant surface.

24. Make sure that the lead cable does not hang

over the edge of the worktop or table, since

this can cause accidents, for example if

small children pull on the cable.

25. Route the lead cable so that it is prevented

from being pulled or tripped over.

26. Never wrap the lead cable around the

appliance, but around the cable storage on

the bottom of the base.

27. Always disconnect the lead cable from the

wall socket pulling on the plug, never on the

cable.

28. Never carry the base by the lead cable.

29. Do not use the appliance with accessories

of other manufacturers or brands, to prevent

damage.

30. Disconnect the appliance from the wall

socket after use and prior to cleaning. Never

leave the appliance unattended when it is

connected to the wall socket.

31. Let the appliance cool off before cleaning it.

32. Never open the casing of the popcornmaker.

There is danger of electric shock.

33. Check the appliance, the wall socket and

the lead cable regularly for wear or damage.

In case the lead cable or other parts appear

damaged, please send the appliance or the

base to our after sales service for inspection

and repair (for address, see warranty terms).

Unauthorised repairs can constitute serious

risks for the user and void the warranty.

CAUTION:

The appliance becomes hot during

operation!

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if

repairs are carried out by unauthorized third parties.

BEFORE FIRST USE

1. Remove all packaging materials and any

transport safety devices.

2. Clean all parts with a damp cloth, as

described in the chapter “Cleaning and

care” on page 18.

3. Check if the appliance is placed firmly.

4. Connect the base to the mains supply by

means of the lead cable (230 V~, 50 Hz).

5. Preheat the appliance for some minutes

on highest level before using it for the first

time to remove eventual production residues

on the plates. Open the window during this

heating period. Let the appliance cool down

after the initial heating. After the initial

heating you see some use tracks, however,

these will not affect the function of the

appliances and are no reason for complaints.

OPERATION

1. Set the mixer (3) on the axle and fix it clock-

wise with the screw (2).

2. Fill approx. 100 g of corn kernels into the

bowl. The bottom should be covered to

75 %. Do not use more kernels at a time.

If the popping chamber is overfilled the

appliance might get blocked.

3. Add approx. 2 tablespoons of oil as well

as salt or sugar to taste. Do not add other

spices, they might burn.

4. Put the lid (1) on the motor block (4).

5. Put the plug into a power socket.

6. Set the timer to the maximum time.

7. The appliance starts to heat and the corn

begins to pop up. The mixer ensures a

uniform mixing of popped and unpopped

kernels and thus provides a higher

performance. However, it is normal, that

a certain number of kernels remains

unpopped.

8. When the preset time has finished, the

appliance switches off. The mixer continues

to turn to avoid the popcorn from sticking

together.

9. Unplug the appliance before opening the lid.

10. The lid (1) serves also as serving dish.

To take out the popcorn, turn the whole

appliance using oven cloths and turn the

motor block off clockwise (see photo).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Unold 48556 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Unold 48556 Manual

Product: