111427

Unold 28811 Manual

31
Zoom out
Zoom in
Previous page
1/100
Next page
31
Reinsert the coffee outlet into the support on the appliance.26.
Cleaning the steam nozzle
Carefully detach the nozzle from the frother.27.
Carefully clean the nozzle with warm water and a mild 28.
washing-up liquid. Rinse the nozzle with clear water and dry
it thoroughly.
Reattach the steam nozzle on the frother.29.
Detaching the brewer assembly
The automatic coffee machine has a detachable brewer 30.
assembly, which is important for the coffee quality and the
operational reliability of the appliance. Clean the brewer
assembly regularly, if necessary daily.
Open the lateral cover. Always detach the coffee grounds 31.
container first, then the brewer assembly, holding them on
the handle and pressing the plate with the label PRESS
downwards and extracting the brewer assembly.
If it is not possible to extract the brewer assembly, the water 32.
drain pipe might be trapped. The water drain pipe is installed
in the upper left of the brewer assembly. Carefully pull on the
drain pipe until the brewer assembly can be detached. After
cleaning the gasket of the water drain pipe, grease it with a
silicone lubricant.
Rinse the brewer assembly with water. Do not clean the 33.
brewer assembly in a dish-washer. To clean all components
of the brewer assembly, insert the brewer assembly key into
the round hole on the rear of the brewer assembly and turn it.
Rinse the brewer assembly with water.
Clean the perforated screens of the brewer assembly with 34.
a soft brush, if necessary. The perforated screens can be
detached using the brewer assembly key.
Do not use cleaning agents or disinfectants to clean the brewer 35.
assembly. Dry the brewer assembly with a soft cloth.
Grease the lateral guides as well as the red gasket of the 36.
brewer assembly every once in a while with the silicone grease
enclosed. The red gasket should be replaced once a year or
according to its wear.
Also grease the water inlet port of the brewer assembly.37.
To better distribute the grease, actuate the brewer assembly 38.
several times using the brewer assembly key. Reinsert the
brewer assembly into the automatic coffee machine.
Extract, empty and clean the coffee powder drawer beneath 39.
the brewer assembly.
Clean the inside of the automatic coffee machine with a dry 40.
cloth or a cleaning brush.
Then put the brewer assembly back to its initial position. The 41.
brewer has two arrow marks on the front beneath the handle.
These must point at one another to allow the insertion of the
brewer assembly.
First reinsert the brewer assembly until it latches into place, 42.
then reinsert the coffee grounds container.
Should the brewer assembly be trapped, thus making its 43.
extraction or reinsertion impossible, the appliance has to be
inspected and repaired by our after-sales service
All components of the automatic coffee machine have to be 44.
dry before reinserting them and using the appliance.
Never clean the brewer assembly with a cleaning agent or disinfec-
tant.
Never dry the brewer assembly or other components with a hair dryer
or other electric drying appliances or in the oven/microwave.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 28811 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28811 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info