111427

Unold 28811 Manual

28
Zoom out
Zoom in
Previous page
1/100
Next page
28
(STANDBY AFTER 120 MIN.), the appliance switches to standby
mode 120 minutes after the last operation carried out.
When the display indicates
STANDBY
NACH 240 MIN
(STANDBY AFTER 240 MIN.), the appliance switches to standby
mode 240 minutes after the last operation carried out.
When the display indicates
STANDBY
NACH 480 MIN
(STANDBY AFTER 480 MIN.), the appliance switches to standby
mode 480 minutes after the last operation carried out.
The default setting is STANDBY.
To confirm the setting immediately, press the MENÜ/MENU button
for three seconds, thus abandoning the menu.
To programme further changes, press the MENÜ/MENU button
once briefly, in order to access the next option.
Cup totalisator
The cup totalisator indicates the total number of cups of coffee
prepared since the starting up of the appliance.
To activate the menu, press the MENÜ/MENU button until the
message on the display changes.
Press the MENÜ/MENU button six times. The following message
is displayed:
GESAMTANZAHL
00000
This submenu does not allow any settings. Please bear in mind
that due to the in-plant tests a certain number of cups will be
indicated.
Reset
This feature deletes all personal settings and re-establishes the
default settings.
To activate the menu, press the MENÜ/MENU button until the
message on the display changes.
Press the MENÜ/MENU button seven times. The following message
will be displayed:
WERKSEINSTELLUNG
Press the MENÜ/MENU button and maintain it pressed for 3
seconds. After this the appliance has re-established the default
settings.
Automatic descaling
To activate the menu, press the MENÜ/MENU button until the
message on the display changes.
Press the MENÜ/MENU button eight times. The display
indicates:
ENTKALKEN
NICHT STARTEN
The automatic descaling will not start. After reaching the number
of cups set in the water hardness settings, the following message
is indicated:
GERÄT
ENTKALKEN
Press the button once.
The following message will be displayed:
ENTKALKEN
STARTEN
After abandoning the menu, the automatic descaling process
starts.
If you access the submenu for the settings of the water hardness
by pressing the MENÜ/MENU button, all previous settings will not
be saved!
Closing the programming mode
Save changes
If you maintain the MENÜ/MENU button pressed until the
displayed indication shifts, all previous programme changes will
be saved.
This may be carried out for each item of the menu individually.
Nevertheless, you may also use the MENÜ/MENU button and the
buttons
and to browse all submenus, carry out the desired
settings and confirm and save these settings altogether at the
end.
Closing the programming mode without saving
If no button is pressed during approx. 5 seconds when being in
programme mode, the programme mode is abandoned without
saving the changes made.
If you access the submenu for the settings of the water hardness
by pressing the MENÜ/MENU button, all previous settings will not
be saved! If this happens accidentally, you will have to repeat all
changes previously made and not saved.
Descaling
MANUAL DESCALING
If the flow rate decreases or coffee is no longer brewed, a manual
descaling is recommended.
Fill the water tank with the descaling product.
Switch the appliance on and wait until „Betriebsbereit/Ready“ is
indicated.
Now press the button „Coffee mug“.
With resistant calcinations it might be necessary to press the
button several times until the normal flow rate is achieved.
As soon as the flow rate is normal again, press the button „Coffee
mug“ twice.
After this empty and clean the water tank.
Fill the water tank with fresh, cold water and insert the tank into
the appliance.
Our automatic coffee machines have a descaling memory and an automatic descaling programme and also offer the possibility for
manual descaling.
If the flow rate decreases or coffee is no longer brewed, a manual descaling is recommended.
Use an ecological descaling product. Make sure that the descaling product is adequate for automatic coffee machines.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 28811 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28811 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info