406259

Unold 28505 blue eyes Manual

17
Zoom out
Zoom in
Previous page
1/52
Next page
17
SETTING THE TIME
BREWING COFFEE WITHOUT THE TIMER FUNCTION
1. Prepare the appliance as described in the
section “Before using the appliance the first
time” on page 15.
2. Open the lid of the appliance.
3. Fill the water tank with clear, cold water for
the number of cups you want to brew, but
not past the “Max” marking.
4. Check to make sure that the filter is
correctly inserted in the filter holder. The
filter can only be inserted one way in the
filter holder.
5. Put the required quantity of ground coffee
in the filter. Make the coffee according to
your personal preference; we recommend 5
to 7 grams of medium-fine ground coffee
per cup. Coffee that is ground too fine can
clog the pores in the filter, which can cause
the coffeemaker to overflow.
6. Close the lid of the appliance.
7. Pace the glass pot with the lid closed on the
warming plate.
8. Press the “EIN/AUTO/AUS” button.
9. The indicator lamp in the “EIN/AUTO/AUS”
button lights up red and the brewing cycle
begins.
10. When the brewing cycle is complete, switch
the appliance off by pressing the “Ein/Auto/
Aus” button two times consecutively.
11. You can interrupt the brewing cycle any time
by pressing the button “EIN/AUTO/AUS”
two times consecutively. The indicator lamp
in the button lights up blue for about 10
seconds. As soon as you press the “EIN/
AUTO/AUS” button again, the brewing cycle
resumes.
12. You can also remove the pot to pour coffee
any time during the brewing cycle. However,
the pot must be put back on the warming
plate within 30 seconds, since otherwise
the filter could overflow.
13. If you do not switch off the appliance after
completion of the brewing cycle, the warming
plate remains on. For safety reasons, the
warming plate switches off automatically
two hours after starting the brewing cycle.
14. Remove the permanent filter and dispose of
the coffee grounds.
1. As soon as the coffeemaker is connected to
the power supply the display shows 12:00.
2. Press the “PROG” button.
3. The display shows “CLOCK” at the upper
right.
4. Now press the “STD” and “MIN” buttons
until the current time is set.
5. After about 10 seconds with no input the
appliance returns to the initial state; you
now see the current time and can start
brewing coffee.
6. In case of a power outage lasting longer
than about 10 seconds the time is not
saved, which means you have to reset the
time whenever the appliance has been
unplugged.
12:00
Clock
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unold 28505 blue eyes at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unold 28505 blue eyes in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info