573374
169
Zoom out
Zoom in
Previous page
1/170
Next page
164
86 INCORRECT BRANCH
132 IN END TIME shown by SP-185 Grace Period
131 IN START TIME shown by SP-185 Grace Period
93 INSERT SMART CRD
113 INVALID PHONE #
121 INVALID SCALE
61 IRC INIT REQD
117 IRC PROGRAM CHNG
107 JOURNAL NEAR END
103 JRNL PAPER OUT
37 KP ERROR
42 KP PAPER LOW
78 KP REDIRECTED
98 LOGON COMPULSORY
85 LOYAL COMMS FAIL
11 MANAGER KEY REQD
127 MANUAL TARE PROH Set [PF-6.F] to YES.
10 MENU SELECTION
64 MONITORING JRNL
34 MUST SOTRE/CLOSE
52 MUST TENDER
120 NEW CUSTOMER
84 NEW POINTS BAL :
3 NO MODIFIERS Ensure that the PLU is programmed to permit modifiers. [PF-2.B,A]
62 NO OPTIONS Either use a clerk with appropriate security, or ensure that the clerk has
appropriate security settings.
SP-181, 182
20 NO SUCH BILL Press CLEAR key and retry operation with correct bill or table
number.
2 NO SUCH PLU Enter the correct PLU code, re-program the PLU correctly, make sure
the PLU is allocated on the keyboard, make sure it exists.
SP-122
SP-110
66 NO SUCH ROOM The selected room does not exist on the PC. [SF-58.H]
96 NOT ENOUGH FUNDS
67 OCCUPIER LIST Choose an occupier for the room that you have selected. [SF-58.H]
77 ONLINE AUTHORIZE
134 OUT END TIME shown by SP-185 Grace Period
133 OUT START TIME shown by SP-185 Grace Period
1 OVERLIMITATION Press CLEAR key and re-enter the correct number.
26 OVER TEND PROHIBITED Press CLEAR to cancel the operation and select a media permitted for
over-tendering.
[MF-1.E]
119 PASSWORD ERROR Entered numbers for Euro conversion sequence is not correct.
100 PC SLIP ERROR
Cable incorrect, disconnected, faulty slip printer, incorrect
communication settings, paper out.
[SF-91-93.
C,B,A]
[SF-46.H]
[SF-102.H]
135 PERIOD displayed on the menu for X/Z-20 Labor Cost report
68 PERSON TYPE
112 PHONE# HAS CHANGE Enter correct number to pick up a customer file.
148 Please Re-SignOn for Remote Operation Device
83 POINTS AWARDED :
36 PRESS ANY KEY Either press CLEAR key to exit, or press the desired key you wish to
program.
32 PRESS CLEAR Press CLEAR key once the warning message has been read.
51 PRESS SUBTOTAL Press CLEAR then press SUBTOTAL key. [SF-22.G]
4 PRESS X
82 PREV POINTS BAL:
25 PRINTER ERROR The printer unit has failed to respond, check it is connected properly, if
it is then there may be a fault with the printer. Contact your Uniwell
dealer.
102 PRINTER HEAD HOT
101 PRINTER HEAD UP
149 Processing... for Remote Operation Device
106 RECEIPT IS OFF
105 RECIEPT IS ON
169


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniwell SX-800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniwell SX-800 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info