573393
111
Zoom out
Zoom in
Previous page
1/130
Next page
107
FLASH IRC REPORTS
Flash read-only reports as shown below can be issued at any time on the master ECR by using the
following sequences in the X key position only. The flash report will not disturb the slave ECR even
when the slave ECR is in transaction, report issuing or programming sequence.
Flash report is printed on the master ECR with the IRC status. No message will be displayed and X-
report will not be counted up for a flash report on a slave ECR. If the flash report can not be taken
from a slave ECR, the IRC status "slave ECR's machine number and NG" are printed on the master
ECR.
Report Sequence
FLASH IRC REPORT # REQUIRED #
Transaction 8601 (1st level) 8602 (2nd level) See Table below.
Hourly 8605 (1st level) 8606 (2nd level) one of time zone 0 ~ 23
Grand Total 1 8607 no number required
Cash In Drawer 8608 no number required
Clerk 8610 (1st level) 8611 (2nd level) one of clerk sequential #1 ~ 64
Main Group-A 8620 (1st level) 8621 (2nd level) one of main group-A #1 ~ 10
Group-A 8625 (1st level) 8626 (2nd level) one of group-A #1 ~ 98
Group-A Stock 8627 one of group-A #1 ~ 98
Group-B 8630 (1st level) 8631 (2nd level) one of group-B #1 ~ 25
PLU 8640 (1st level) 8641 (2nd level) one of PLU code
PLU Stock 8642 one of PLU code
Clerk Item Track 8664 one of clerk sequential #1 ~ 64
Required #s and Contents for X-8601/8602
1 media amount, count in sales 13
new balance amount, count of Item Track
charge amount, count of Amount Track (option)
2 media amount, count in drawer & rounding error 14 amount, count of cheque-cashing, currency exchange
3 taxable sales & tax amounts 15 training amount, count
4 %1 ~ %3 amount, count 17 no sale count
5 (-) discount amount, count 18 number of people
6 (+) plus amount, count 20 transaction count
7 adjustment amount, count 21 tip amount
8 P/O amount, count 27
positive previous balance amounts, counts for Item
Track and Amount Track (option)
9 R/A amount, count 28
negative previous balance amounts, counts for Item
Track and Amount Track (option)
10 void amount, count 29 net charges for Item Track and Amount Track (option)
11 refund amount, count
12 transaction void amount, count
Note for X-8610 Clerk : This is printed with X-8664 Clerk Item Track flash IRC report if programmed.
Note for X-8664 Clerk Item Track
Number of tracks per ECR printed on this report is limited to 15 when the clerk interrupt system and/or Automatic Track #
Method is used, or 17 when non-clerk interrupt system and Manual Track # Method are used. (Area for two tracks are
occupied by table #.) If a clerk has more than 15/17 tracks, "ECR machine # --->" mark is printed on the report. However,
always up to 17 tracks can be printed by the master ECR.
All ECRs
X
Report # X2
TTL
25
Required
#
Per ECR
ECR
machine #
for X-8607, X-8608
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniwell SX-330F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniwell SX-330F in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info