573393
86
Zoom out
Zoom in
Previous page
1/130
Next page
82
31. Floating Item Track / Floating Amount Track
Almost all operations are same as the normal Item Track and Amount Track operations. The only
difference is that the track data is floating among ECRs in the IRC system. In order to use this system,
the IRC status check must have been performed with each ECR.
The following describes the key sequences and memory conditions on the master which picks up the
track and the slave ECRs;
< New Item / Amount Track Open >
Track Number Entry Method, either Manual Track Number Method or Automatic Item Track Number Method,
used on the ECRs should be the same in the IRC system.
Manual Track Number Method
- When the track number is entered with ITEM TRACK # or AMOUNT TRACK # key, the master
checks the track memories in the IRC system.
- If it is a new track number in the IRC system, the track number is opened.
- If it is already used, the master picks up the track data.
Automatic Item Track Number Method (Item Track System Only)
- When ITEM TRACK # key is pressed, the master searches the slaves for the track number next to
the track number on the master. When the unique automatic track number method is used, the track
number will be the next to track number on each ECR.
- If it is a new track number in the IRC system, the track number is opened.
- If it is already used by other ECR, the master searches the slaves for the next track number until a new
track number is found within the programmed maximum track number. When the unique automatic
track number method is used, it will be the next track number on each ECR.
- If there is no new track number, the master checks the already closed track having the smallest
number and it will be opened as a new track.
- If there is no closed track, the master displays Warning Message #34.
< Item / Amount Track Pick Up >
When the track number is entered with ITEM TRACK # or AMOUNT TRACK # key, the master searches the
track memory by itself. If the track is not found on the master, the master then searches the slaves and collects
the track data from it. The collected data is deleted from the slave.
If a communication error occurs, the master makes "New Track" by pressing X2 key if permitted. The track
made by X2 key should be closed by NB key or CHARGE key, then the "track consolidation" (see next page)
must be performed to avoid the tracks having same number on the master and slave.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniwell SX-330F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniwell SX-330F in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info