573393
8
Zoom out
Zoom in
Previous page
1/130
Next page
4
SPECIFICATIONS
SX-330/330F
Printer model Epson M-U420 2-station impact dot matrix with auto cutter
Printing speed 3.0 lines/sec
Columns/line
receipt
journal
validation
24 columns
24 columns
55 columns
High grade paper roll 44.5 ± 0.5 mm x ø83 mm
Paper
Validation paper
135 to 210 mm (width), min. 70 mm (height), 0.07 to 0.14 mm (thickness)
PRINTER
Ink ribbon Epson ERC-32, purple
Stroke keyboard SX-330: 90 key positions
KEYBOARD
Flat keyboard SX-330F: 156 key positions
Front (2-line)
Upper: 16 digits dot matrix
Lower: 12 digits numericDISPLAY
Rear (1-line) 12 digits numeric (standard)
POWER SUPPLY
AC 120V / 230 or 240V ± 10%, 50/60Hz
POWER CONSUMPTION 1A (120V) / 0.3A (230 or 240V)
TEMPERATURE
Operation : 0° ~ 40°C (32° ~ 104°F)
Storage : -10° ~ 60°C (-14° ~ 140°F)
DIMENSIONS 416 (W) x 446 (D) x 223 (H) mm
WEIGHT 7 Kg
RAM CAPACITY
Standard 512 K bytes --- 4 M bit RAM chip x 1
Max. 2560 K bytes --- optional RAM board (4 M bit RAM chip x 4)
MEMORY PROTECTION 3 months
INTERFACE CHANNEL CONTENTS
A RS485
IRC : up to 32 units including an ECR master or PC as IRC master
(Tensai2000) via NA-720 including floating track system and floating
clerk system
8 kitchen printer
One of the following kitchen printers can be used as a slip printer.
TP-420 : shuttle impact dot matrix printer without auto cutter
TP-422 : shuttle impact dot matrix printer with auto cutter
TP-522 : serial impact dot matrix printer with auto cutter
CBM-233 : thermal printer with auto cutter (connected via NA-710/730)
8 slip printers
TP-620 : impact dot matrix printer
Network Adapters
NA-710/730 for 1 or 3 thermal kitchen printer(s)
NA-720 for PC as IRC master or for Modem to PC
on MPU board
(standard)
B RS232C
One of :
- Scanner
- Scale (not available now)
- Thermal slip printer TM-T85/88II
- PC batch communication, programming loader module PLM 2000
- ECR to ECR RAM data transfer
- Journal data transfer
D RS232C
Same as channel B
(except thermal slip printer TM-T85/88II and ECR to ECR RAM data transfer)
SX IF7-1 K-UNIT
(option)
E RS232C
Same as channel B
(except thermal slip printer TM-T85/88II and ECR to ECR RAM data transfer)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniwell SX-330F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniwell SX-330F in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info