573394
151
Zoom out
Zoom in
Previous page
1/180
Next page
146
c) X/Z-20 Labor Cost Report
How to Take "Summary" or "Complete" Labor Cost Report
1. Select X/Z-20 LABOR COST report.
2. "EMPLOYEE #< >" (User Text #117) is prompted. Enter the sequential clerk number.
Press [ENTER]. If [ENTER] without the sequential clerk number, full clerk.
3. Select "SUMMARY" or "COMPLETE".
"COMPLETE" is set for the standard.
4. "COMPLETE" is set for the standard.
X-20-LABOR COST REPORT DAILY WEEKLY PERIOD
SEQUENTI
AL
COMPLETE
TABLE BILL
SERVER PERSON
SUMMARY
×
Location
Ø
X-01-AUTO FULL TRANS REPORT
X-02-AUTO FULL TRANS REPORT
5. Select Report Type and take a report. There are four types of report: Daily, Weekly, Period for two weeks
and Sequential for specified period. See next page for Complete and Summary report samples.
6. Follow the report sequences below:
Report Type Report Sequence
DAILY
Report of the selected date:
(YYYYMMDD) - [ENTER] - [TO LCD]/[PRINT]
Note: When the date entry is skipped, the report will be TODAY's report.
Report from the selected day of the week to the day of the operation:
skip date entry - [ENTER] - [one of day of the week] - [TO LCD]/[PRINT]
Note: If the same day of week as the day of your operation is selected, it turns out to be DAILY
report.
WEEKLY
Report of one whole week as from the selected date:
(YYYYMMDD) - [ENTER] - [TO LCD]/[PRINT]
Report from the selected day of the week to the day of your operation + one whole previous week:
skip date entry - [ENTER] - [TO LCD]/[PRINT]
PERIOD "TWO WEEKS"
Report of two whole weeks as from the selected date:
(YYYYMMDD) - [ENTER] - [TO LCD]/[PRINT]
Report from the selected date to the date of your operation:
- (YYYYMMDD: starting date) - [ENTER]
- skip date entry - [ENTER] - [TO LCD]/[PRINT]
SEQUENTIAL
Report of specified period:
- (YYYYMMDD: starting date)- [ENTER]
- (YYYYMMDD: end date)- [ENTER] - [TO LCD]/[PRINT]
Notes:
1. X/Z-20 LABOR COST report can be calculated 10 times for each clerk's "LOG-ON and OFF" per day. In
other words, each clerk can "LOG-ON and OFF no more than 10 times a day for the calculation of X/Z-20
LABOR COST report. ("LOG-ON LOG-OFF" is counted as 1.)
2. Z-20 LABOR COST report can only eliminate printed contents of the report.
3. When the DAILY Z-20 LABOR COST report is taken, data of the selected day is erased and therefore
calculation of WEEKLY LABOR COST report goes wrong.
And also, when the WEEKLY Z-20 LABOR COST report is taken, printed data is eliminated, and therefore
DAILY report of the selected dates in the WEEKLY report can not be printed as the matter of course.
Daily
Weekly
Period (fixed to "two weeks" report)
Sequential (specified period)
SUMMARY
COMPLETE
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniwell DX890 - 06 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniwell DX890 - 06 in the language / languages: English as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info