528076
30
Zoom out
Zoom in
Previous page
1/40
Next page
User’s Manual · U5101
Reserved of technical modifications and/or errors - 30 - U5101 Version en_1.1 Univers by FTE
7.4. TV Settings
Here you can adapt your receiver to your TV set and you can select
the screen format.
TV-System
Select here which TV system your TV set support.
Selection: NTSC, PAL, Secam and AUTO
Please change with the buttons
.
TV-Format
Select here which TV format your TV set has available.
Selection: 4:3, 16:9 and AUTO, please change it with the buttons
.
RF Mode
If you connect your TV or Video set with one IEC coaxial connection at the
output TO TV, you will need to select which system is supported by this device.
Options: PAL M, B/G, I, D/K or NTSC , please change them with the buttons
.
RF Channel
Here you can select which channel the modulator has to use.
This is only needed if you connect your receiver with the IEC coaxial connection at the
output TO TV to your TV set.
Selection: Channel 21 to 69, please change with the buttons
.
Picture Format
This option is only available when you have not selected TV format in mode AUTO.
Options: Pan&Scan or Letter Box , please change with the buttons .
In this option you can choose how the pictures in films with a big format will be adapted to your TV set.
If you select Pan&Scan you will see one part of the film and at the left and right sides it will be cut
In Letter Box, the picture will become smaller and you will see on top and bottom two black bars.
TV output
This option allows choosing how the receiver will send the colours to the TV set.
Selection: CVBS , RGB, SVIDEO or YUV , please change with the buttons
.
Loop VCR
Here you select the priority of an external video signal.
If you have selected Slave, the receiver shows every time the signal coming from the VCR Scart connector, when there
is signal available. It also can be a signal from DVD player or recorder.
If you have select Master , the signal from receiver has priority and you will see only the signal from connector VCR
scart when the receiver is in Standby mode.
INFO: This receiver has a special LPC mode for saving current. If you select Slave the LPC mode will be disabled.
Selection: Master or Slave , please change with the buttons
.
LPC Mode
This receiver has a special LPC mode for saving current. This reduces the consumption in Standby mode.
Please check your settings in menu Loop VCR . In the LPC mode, the antenna signal keeps cut at the output TO TV ,
so if you use the antenna signal to watch the TV through the receiver, you should disable it.
Selection: ON or Off , please change it with the buttons
.
The LPC function has 2 consequences. The first one is the time it delays to switch from Stand By to working mode, and
the second one is that in this mode, the signals which has to pass through the tuners or the modulator are attenuated
because off the unfeeding from the main board. If whatever of these 2 effects are disturbing you during the use of your
PVR, just disable this function.
Sleep
If you want shut down the receiver automatically, you can choose here the time for the sleep timer.
Selection: 15, 30, 45, 60, 75, 90, 105, 120 or Sleep Off
Please change it with the buttons
.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Univers by FTE U5101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Univers by FTE U5101 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info