528076
14
Zoom out
Zoom in
Previous page
1/40
Next page
User’s Manual · U5101
Reserved of technical modifications and/or errors - 14 - U5101 Version en_1.1 Univers by FTE
Selection of the Pre-Stored Channel List
This option allows loading the channel list stored in your receiver, and
you will not need to tune channels. The list includes Astra / Hot Bird /
Hispasat / Turksat channels, and it is supposed that the same input
signal is available in both inputs.
If you select Load Channel List, the installation assistant finishes at this
point and it begins the viewing of the channels.
In case of having a different configuration, please select Tune new
channels and continue with the installation assistant, configuring the antennas.
Antennas configuration:
In this menu, you should configure the connected signals in the IF
IN of your PVR.
By default, the equipment comes with the configuration that you
can see in the Picture, with four satellites.
The available options in this screen allow:
Red Button: Deletes the selected satellite. It asks for confirmation.
Green Button: Edits the selected satellite. The options appear at
the image below.
Yellow Button: Adds a satellite. The options appear at the below
image.
Antenna Options:
- Name: Your PVR disposes of several pre-configured
satellites. You can find the one you want in the list or
add a new one. They are sorted by its orbital position.
- Band: There are two available bands: C and Ku. The
differences basically are the frequencies in the
transmission. The Ku band has two possibilities; the
most common is the Universal Ku.
- Low Band / High Band: It is used when the band
selection is the Ku, and it programmes the local
oscillators of the LNC.
- DiSEqC 1.0 / 1.1 Port: To configure the use of switches.
- Motor: Activates the motor option to direct the antenna.
- 22 KHz: tone of switching the band of the LNC.
- LNB Power: LNB Feeding. By default the selection is for
an Universal LNB.
- Signal: It shows if there is available signal in this
selected configuration.
LIST Button: Change the selection of the antenna to the Input 2. This function is only possible when it has
been selected the input 2. This function is only possible when it has been selected previously that there are
two LNB. In case of selecting only one or LOOPTHROUGH, the second input is not available. The system
to select the satellites to the antenna 2 is exactly the same to the input 1, using the Yellow Key to add
satellites.
Alter whatever change, it should be confirmed with the OK key when you exit the menu.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Univers by FTE U5101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Univers by FTE U5101 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info