528073
30
Zoom out
Zoom in
Previous page
1/38
Next page
English
PAG.
30
rev 1.3
SYSTEM SETUP
- Wakeup Date: use number buttons to input your wakeup
date.
- On Time: use number buttons to input your wakeup time. If
date and time are reached then no matter if the system is in
standby mode or in playing mode, it will automatically switch
to the channel you set and start to play.
- Duration: Here you can set the time you want to see or play
this channel. After the time set the system will automatically
switch to standby mode. If you don’t want the box to be swit-
ched to standby mode then set the duration to 00:00.
5. When you select “Message” (reminding message) option in
“Timer Service” then you can enter additional data (OSD 62):
- Wakeup Message: press [
] to select the category of the
reminding message from Birthday, Anniversary and General.
- Wakeup Date: Use the [Number] buttons to input your wakeup
date.
- On Time: Use the [Number] buttons to input your wakeup
time. If date and time are reached, no matter if the system is in
standby mode or in playing mode, it will automatically show a
reminding message.
- The message will be displayed on the screen until you press
[Exit] to close it.
6. Press [Exit] to leave the “Timer” menu.
5.3.2. LOCAL TIME SETTING
When you select “Local Time Setting” and press [OK] then you
will see a window like the one beside (OSD 63):
1. GMT Usage: This item is used to set the time by using the
time signal from the satellite. Press [ ] to change the
setting.
2. The “GMT Offset” item is only available when “GMT Usage”
is set to “On”. Press [ ] to set the “GMT Offset” value.
With every time you press the button the time offset will be
increased / decreased by half an hour.
3. Summer: this option is only available when “USE GMT” is
enabled. Use [ ] to switch on/off the summer timetable.
4. “Date” and “Time” items are only available when the “GMT
Usage” is set to “Off”. Press [ ] to select one item and
use number buttons to input time and date directly.
NOTE: If the current channel provides the correct time
information, you will see the current time after you entered
“Time” menu. If the channel doesn’t provide time information,
you have to input the date and time information manually. The
most channels support the time signal.
5. Show time: Use [ ] to switch on/off this option. When
the option is enabled, the time will be displayed at the TV in a
frame in the top right margin.(OSD 64)
6. Press [Exit] to exit the menu.
OSD 62
OSD 63
OSD 64
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Univers by FTE U4123 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Univers by FTE U4123 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info