658401

Univega 2012 Manual

42
Zoom out
Zoom in
Previous page
1/68
Next page
42 I General User Manual
21.2 Brake lever
21.2.1 Standard brake lever
The bike is equipped as standard with a suitable brake
lever. Check regularly that when you operate the brake
lever it does not reach the handlebar and make contact
with it. With the brake lever pulled, push the bike forward
and check whether the braking performance is sucient.
If the bike rolls slightly forwards, you will need to have
the brake cable readjusted or the brake pads replaced.
Brake cable adjust-
ment screw
Lever pull range
adjustment screw
Fastening screw
21.3 Hub brakes
Hub brakes are virtually maintenance-ee as the brake
block is inside the hub.
If applied continuously for an extended period, hub
brakes become very hot. This reduces the braking
performance and ultimately complete failure of the
brake. You should adapt your handling accordingly.
21.3.1 Drum and roller brakes
With the roller brake or drum brake, the braking force is
transmitted via a cable om the hand brake lever to the
brake system. If applied continuously for an extended
period, roller brakes or drum brakes become very hot.
This reduces the braking performance and can result in
complete failure of the brake. You should adapt your han-
dling accordingly.
The brake lever of roller and drum brakes requires
special tuning.
Check regularly that the screws on the brake lever
are tight.
Turn them clockwise to retighten if necessary. For
the correct tightening torque, refer to
Chapter 30
"Technical data".
Pull on the ont wheel or rear wheel hand brake
lever with the same amount of force as you would
apply when braking sharply during a ride. Then
push the bike forwards. The rear wheel should lock.
The ont wheel should decelerate so rapidly that
the bike starts to tip forwards.
Lubricate the cable-pull regularly.
Brake pads are wear parts. Have the brake pads for
back-pedal, roller and drum brakes checked regularly,
and replaced if necessary, by a professional bike
workshop.
If you have not used your bike for a while, there may
be surface rust in the brake drum which can increase
the braking force. You should therefore brake gently
several times when riding o to remove the surface
rust. This prevents sudden blocking of the brake.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Univega 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Univega 2012 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Univega 2012

Univega 2012 User Manual - German - 68 pages

Univega 2012 User Manual - Dutch - 68 pages

Univega 2012 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info