576639
5
Zoom out
Zoom in
Previous page
1/43
Next page
- 2 -
Cross Cut Shredder
Introduction
Congratulations on the purchase of your new appli-
ance.
You have clearly decided in favour of a quality
product. These operating instructions are a part of
this product. They contain important information in
regard to safety, use and disposal. Before using the
product, familiarise yourself with all of these opera-
ting and safety instructions. Use the product only as
described and only for the specified areas of appli-
cation. Retain these instructions for future reference.
In addition, pass these documents on, together with
the product, to any future owner.
Intended Application
This appliance is only suitable for shredding paper,
credit cards, CDs/DVDs and small staples (sizes:
24/6 and 23/6 (11.5 x 6mm), B-8 (11.5 x 7mm),
No10 (8.4 x 5mm)) and paper clips (up to 25 mm)
in private households. All other usages or modifica-
tions are regarded as improper and carry a significant
risk of accidents. Do not use this appliance for com-
mercial purposes.
Items supplied
Cross Cut Shredder
(Cutter attachment, waste container large/small)
Operating instructions
Appliance description
Figure A:
q
Cutter attachment
w
Small waste container
e
Viewing window
r
Large waste container
Figure B:
t
Cutter opening for CDs/credit cards
y
Cutter opening for paper
u
Switch
Technical details
Input voltage: 220 - 240 V
~
, 50 Hz
Rated current : approx. 1.0 A
Nominal power: 220 W
Protection class: II
Large waste container: 21 litres
Cutting process for
paper: Cross-cut,
4 x 18 mm particles
Safety level 4
Working width: 220 mm
Cutting capacity: 8 sheets (80 g/m
2
)
Overheating protection
This appliance is fitted with overheating protection.
If the motor overheats due to overloading, the appli-
ance switches itself off automatically. If this occurs,
proceed as follows:
Caution:
Remove the power plug from the wall socket to avoid
unintended starting of the appliance
Switch the appliance off by moving the switch
u
to the middle position "OFF".
Empty the waste containers
w
/
r
.
Allow the appliance to cool down.
Put the plug back into the socket.
Switch the appliance on by moving the switch
u
to the "AUTO" position.
We recommend that you let the appliance cool down
for about 30 minutes after 3 minutes of operation.
IB_100159_UAV220A2_LB3.qxp 02.07.2014 15:44 Uhr Seite 2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for United office UAV 220 A2 - IAN 100159 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of United office UAV 220 A2 - IAN 100159 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info