576662
26
Zoom out
Zoom in
Previous page
1/28
Next page
- 23 -
Remove any remnants that may be present in the
cutter opening 2 or the cutter blades with a suita-
ble object, such as a pair of tweezers. Ensure that
the plug has been disconnected.
Clean the appliance with a lightly moistened
cloth. For stubborn soiling use a mild detergent
on the cloth.
Non-functionality
If the material to be shredded jams:
This means that you have inserted too much paper
into the appliance (max. 6 Sheets 80g/m
2
).
Slide the switch 1 into the position "REV" should
the paper to be shredded jam. The appliance
now goes into reverse and the material to be
shredded is returned.
Pull the paper to be shredded out of the appliance
and then place the switch 1 at "AUTO".
The appliance is now once again ready for
operation.
If the appliance suddenly ceases operation:
This means that the appliance is overheated and
the automatic safety cut-out has activated itself.
Attention:
Remove the plug from the mains power socket to
avoid an unintended starting of the appliance.
Set the switch 1 to the "OFF" position.
Allow the device to cool down.
Insert the plug back into the socket.
Switch the device on by setting the switch 1
to the "AUTO" position.
If the appliance doesn`t allow itself to be
switched on:
Check that the plug is correctly connected to
a mains power socket.
Try out a different mains power socket.
The appliance is probably defective. Have the
appliance checked by qualified specialists.
The appliance has overheated and triggered
the automatic safety switch-off. For this, proceed
as follows:
Attention:
Remove the plug from the mains power socket to
avoid an unintended starting of the appliance.
Set the switch 1 to the "OFF" position.
Allow the device to cool down.
Insert the plug back into the socket.
Switch the device on by setting the switch 1 to
the "AUTO" position.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2012/19/EU.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of packaging materials in an
environmentally responsible manner.
IB_102780_UAV190A1_LB1 19.08.2014 9:55 Uhr Seite 23
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for United office UAV 190 A1 - IAN 102780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of United office UAV 190 A1 - IAN 102780 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info