585461

Unitec W194-1 Manual

21
Zoom out
Zoom in
Previous page
1/48
Next page
21 English
TIME
G1) NETWORK TIME (Auto-synchronized clock)
The clock on the main unit is synchronized to the
Internet network time automatically and is adjusted
for optimal accuracy.
Note:
• If your PC is not connected to the Internet for a
long period of time, the clock display may not be
accurate.
• You may set the time offset (+/– 0.5, 1, 1.5 or 2
hours) of your home city in the PC program to
adjust DST & time zone if necessary and the time
on your main unit will be updated accordingly.
Hold [CLOCK] 3 on the main unit to set the 12/24
hour format, press [s] 5 or [t] 6 to select and
press [CLOCK] to confirm. The “M” & “D” icons will
flash, press [s] 5 or [t] 6 to select day/month or
month/day format for the calendar. Press [CLOCK] 3
to confirm and exit.
G
2) SUNRISE / SUNSET TIME
To view the sunrise and sunset time of your home
city, press [CLOCK] 3 button repeatedly until the
respective “SUNRISE” or “SUNSET” icon appears.
G3) ALARM TIME
Press [ALARM] 4 button to view the alarm time
and “AL“ icon will appear. Press [ALARM] 4 again to
enable & disable the alarm. “
” icon appears when
alarm is enable. Press [CLOCK] 3 to return to time
display.
Hold [ALARM] 4 for 3 seconds to enter alarm set-
ting mode. Press [s] 5 or [t] 6 to enter the desi-
red Hr/ Min values and press [ALARM] 4 to confirm
setting. When alarm is going off, press [ALARM] 4
to stop alarm for one day. Press [MODE/SNOOZE/
LIGHT] 1 to activate snooze function
H) MOON PHASE
Moon phase is displayed according to the current
calendar automatically.
I) CALENDAR
Press [CLOCK] 3 repeatedly to show the time with
day-of-the-week or seconds.
Calendar can be displayed in day/month or month/
day format. See section A “NETWORK TIME” for
setting.
DISPLAY BACKLIGHT
Press MODE/SNOOZE/LIGHT 1 for an extended
backlight.
LOW BATTERY INDICATION
Low battery indication is available for the main unit
& USB transmitter. Replace the batteries and follow
the setup procedure in this instruction manual.
Low battery indicator
Main unit:
Below the ”IN”-icon in local section
USB transmitter: Below to the “Last Update” box
Remote sensor: Next to the “CH 1 2 3” icons
Note:
After battery replacement, you are required to set up
the RF connection again.
Main Unit & USB Transmitter: Press [PC Search] 2
on main unit, then press [TRANSMIT] 9 on USB
transmitter.
Main Unit & Remote Sensor: Hold [CH/SEARCH] 7
on main unit, then press [TX] on remote sensor.
Refer “ESTABLISH RF CONNECTION WITH MAIN
UINIT” section for details.
USB TRANSMITTER
Press [PC Search] 2 on the main unit and then
press [TRANSMIT] 9 on the USB transmitter to
enforce transmitting RF weather data and set up
the RF connection with the main unit. (See “USB
TRANSMITTER & PROGRAM INSTALLATION”
section to set up the USB transmitter).
Note:
• To run the PC program, ensure that your USB
transmitter is connected properly to the PC via an
USB port.
• When weather data is transmitted from the USB
transmitter, the red LED will flash.
(G) Network Time or
Sunrise + Sunset
Time or
Alarm Time
(H) Moon Phase
(I) Calendar
313500.00_W194-1_Manual.indd 21 15.06.12 11:19
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unitec W194-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unitec W194-1 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info