Administration
A31003-D3000-M100-02-76A9, 11-2013
76 OpenScape Desk Phone IP V3R3, Phone Administration, Administrator Documentation
IP Network Parameters
pending contact requests from the DLS. If there are contact
requests, the phone will send a request to the DLS in order to
obtain the update, just as with a regular DLS connection.
INFO: The URI of the DCMP, as well as the polling interval, are
configured by the DLS. For this purpose, it is necessary that the
phone establishes a first contact to the DLS, e. g. by phone restart
or local configuration change.
A Security PIN can be provided which is used for decrypting data provided by the
DLS during bootstrap. For further information, please refer to the DLS documen-
tation.
Data required
• DLS address: IP address or host name of the server on which the
Deployment Service is running.
• DLS port: Port on which the DLS Deployment Service is listening. Default:
18443
• Contact gap: The parameter is not used.
• Revert to default security: When set, security mode will be set to default.
When using local phone administration, this will be set by selection option
’Default security’ after pressing Save&exit.
• Mode (labeled Mode in the local phone´s Admin menu): Shows whether the
communication between the phone and the DLS is secure. Value range:
"Default", "Secure", "Secure PIN" This parameter is read-only.
• Security PIN: Used for enhanced security.
Administration via WBM
Network > Update Service (DLS)
Administration via Local Phone
|
--- Admin
|--- Network
|--- Update Service (DLS)
|--- DLS address
