680296

Unify OpenScape Desk Phone CP600E Manual

160
Zoom out
Zoom in
Previous page
1/190
Next page
Administration
A31003-C1000-M102-9-76A9, 08/2018
160 OpenScape Desk Phone CP100/200/CP205/CP400/CP600/600E HFA, Administration Manual
administration.fm
Diagnostics
• Maximum jitter: Maximum jitter (in ms) found during the report interval.
• Maximum inter-arrival jitter: Maximum of the interarrival jitter values (in ms). The interar-
rival jitter is the smoothed absolute value of the jitter measurements. It is calculated con-
tinuously. For details about the calulation, see RFC 3550.
• Periods jitter threshold exceeded: Number of observation intervals in which the
threshold for maximum jitter was exceeded.
• Round trip delay: Average value of delay calculated for each RTCP packet. The first value
is available after about 15 sec.
• Round trip delay threshold exceeded: Set to "true" if the average round trip delay
threshold value was exceeded in the report interval.
• Count of lost packets: Number of packets lost in the course of speech decoding.
• Count of discarded packets: Number of the packets discarded without transferring the
contents.
• Periods of lost packets: Number of observation intervals in which the threshold for lost
packets was exceeded.
• Consecutive packet loss (CPL): List of sequences consecutive packets that were all lost,
grouped according to the amount of packets per sequence. The first number in the list
counts single lost packets, the second number counts sequences of two lost packets, and
so on. The last number counts sequences of more than 10 lost packets.
• Periods of consecutive lost packets: Number of observation intervals in which the
threshold for consecutive lost packets was exceeded.
• Consecutive good packets (CGP): List of sequences consecutive packets that were all
processed, grouped according to the amount of packets per sequence. The first number in
the list counts single good packets, the second number counts sequences of two good
packets, and so on. The last number counts sequences of more than 10 good packets. All
values are reset to 0 after an interval without packet loss.
• Periods of consecutive good packets: Number of intervals in which the count of lost
packets went below the threshold.
• Count of jitter buffer overruns: Number of packets rejected because the jitter buffer was
full.
• Count of jitter buffer under-runs: Increased by one whenever the decoder requests new
information on decoding and finds an empty jitter buffer.
• Codec change on the fly: The value is 1, if there has been a codec or SSRC change
during the observation period, and 0, if there has been no change.
• Periods with at least one threshold exceeded: Number of observation intervals with at
least one threshold exceedance. If there is no data, the value is 255. The threshold values
included are:
• maximum jitter;
• lost packets;
• consecutive lost packets;
• consecutive good packets.
… 160 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unify OpenScape Desk Phone CP600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unify OpenScape Desk Phone CP600E in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Unify OpenScape Desk Phone CP600E

Unify OpenScape Desk Phone CP600E User Manual - English - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info