680300
72
Zoom out
Zoom in
Previous page
1/189
Next page
Administration
A31003-C1000-M102-5-76A9, 09/2017
72 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
administration.fm
System Settings
Administration via Local Phone
3.5.5 Redundancy
This section controls the switching between main HFA server and standby HFA server.
If Small remote side redundancy is activated, the phone willl switch over to the standby HFA
server in case the connection to the main server ist lost. By default, this is disabled.
When Auto switch back is activated, the phone will switch back to the main server as soon as
the connection is re-established. By default, this is disabled.
Retry count main sets the number of trials to establish a connection to the main server before
the phone switches over to the standby server. The default is 1.
The Timeout main parameter determines the time interval between the last try to get a con-
nection to the main server and the establishing of a connection to the standby server. The de-
fault is 30.
Retry Count Standby: Sets the number of trials to establish a connection to the standby server
before the phone switches back to the main server. The default is 3.
Timeout Standby: Timeout between two "Retry count standby". The default is 30.
Timeout main: Timeout between two "Retry count main" The default is 30.
TC test retry: TC_Test retry determines the count of how many successfull TC_Tests the
Main system need to answer before the phone switches back, if Auto switchback is en-
abled. The default is 3.
TC Test Expiry: Determines how long the Previous connection needs to timeout to actually
trigger any further SRSR activities.
How much time to wait from one unsuccessfull Retry count main sequence until the next
happens and in which interval the phone will send itself a TC_Test message (in idle mode).
The default is 30.
Lowering this value will significantly increase network load but the phone might detect fail-
ures faster but at an increased risk of false positive detections due to short time network
outage.
|
--- Admin
|
--- Network
|
--- Port configuration
|--- Server port configuration
||---H.225.0 port
||---TC TLS port
|
|
--- H.225.0 TLS port
|
--- Standby server port configuration
|--- H.225.0 port
|--- TC TLS port
|
--- H.225.0 TLS port
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unify OpenScape Desk Phone CP205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unify OpenScape Desk Phone CP205 in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Unify OpenScape Desk Phone CP205

Unify OpenScape Desk Phone CP205 User Manual - English - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info