680300
22
Zoom out
Zoom in
Previous page
1/189
Next page
Startup
A31003-C1000-M102-5-76A9, 09/2017
22 OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
inbetriebnahme.fm
Quick Start
2.3 Quick Start
This section describes a typical case: the setup of an OpenScape Desk Phone CP endpoint in
an environment using a DHCP server and the web interface. For different scenarios, cross-ref-
erences to the corresponding section of the administration chapter are given.
2.3.1 How to Access the Web Interface (WBM)
Prerequisites
The phone´s IP address or URL is required for accessing the phone´s Web Interface via a
web browser. By default, the phone will automatically search for a DHCP server on startup
and try to obtain IP data and further configuration parameters from that central server.
If no DHCP server is available in the IP network or if the DHCP parameter is disabled, the
IP address, subnet mask and default gateway/route must be defined manually.
To obtain the phone´s IP address, proceed as follows:
1. Access the local phone´s Admin menu as described in Section 2.3.2, “Access via Local
Phone”.
If DHCP is enabled (default): In the Admin menu, navigate to Network > IP configura-
tion > IP address. The IP address is displayed.
If DHCP is disabled or if no DHCP server is available in the IP network, the IP address,
Subnet Mask and Default Route/Gateway must be defined manually as described in
How to Manually Configure the Phone´s IP address.
2. Open your web browser and enter the appropriate URL. Example: https://
192.168.1.15 or https://myphone.phones.
For configuring the phone’s DNS name, please refer to Section 3.3.6.2, “Terminal Host-
name”.
If the browser displays a certificate notification, accept it. The start page of the web inter-
face appears. In the upper right corner, the phone number, the phone’s IP address, as well
as the DNS name assigned to the phone are displayed. The left corner contains the user
menu tree.
>
Alternatively, WBM, DLI or DLS (Deployment Service) administration tools can be
used. Its Plug & Play functionality allows to provide the phone with configuration data
by assigning an existing data profile to the phone’s MAC address or E.164 number.
>
Any settings made by a DHCP server are not configurable by other configuration
tools.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Unify OpenScape Desk Phone CP205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Unify OpenScape Desk Phone CP205 in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Unify OpenScape Desk Phone CP205

Unify OpenScape Desk Phone CP205 User Manual - English - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info