647893
45
Zoom out
Zoom in
Previous page
1/96
Next page
45
Programming Radio Systems
Programming Radio Systems
To edit an existing system, use the menu to navigate to
the system setting you want to change. This section
assumes you are programming a new system.
Programming radio systems is completed in two major
steps. Don't skip either step!
1. Plan the system.
2. Program the system into your scanner according to
the plan you prepared in Step 1.
To make planning easier, planning worksheets are
included in the back of this manual for each system type.
Copy the worksheets, then use them to plan out how you
will program the scanner.
Important! Before you start programming your
scanner, make sure the batteries are fresh or fully
charged. If the scanner loses power while you
program it, its memory might be corrupted which will
require you to reinitialize it (see “Initializing the
Scanner’s Memory” on Page 40). All information
programmed in the scanner,including preprogrammed
systems, might be lost.
General Notes
You can store up to 200 systems.
The number of system channels you can have is
limited only by the amount of scanner memory
remaining.
You can store up to 20 channel groups per
conventional system.
Total channels are limited to about 2500.
Channels that have text tags use more memory than
those that do not. If you use a text tag for every
channel, total channels are reduced from 2500 (1600
is typical).
Quickly Programming Racing
Systems
You can use the menu system to program a racing
system (see “Manually Programming Racing Systems” on
Programming Radio Systems
SC230 Paper OM 062206.fm Page 45 Friday, July 21, 2006 7:39 PM
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden USC230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden USC230 in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info