647893
34
Zoom out
Zoom in
Previous page
1/96
Next page
34
Basic Operation
Scanning Preprogrammed Races
Before You Get To The Track
Each driver’s team has several different frequencies they
can use during a race. These frequencies can change
depending on local interference sources or other
frequency issues. Your scanner is preprogrammed with
all of the drivers and their possible frequencies that were
known when it was manufactured.
Before you leave for the track, check the Internet to see if
there are any frequency updates available for your race.
You can save time at the track by setting up as much as
possible before you leave.
When You Get To The Track
When you arrive at the race, get a list of the actual
frequencies in use that race day. These are normally
available for sale on the way into the facility. This list will
show the actual frequency being used by each driver that
day, as well as some other useful frequency information.
Then, follow the steps in the sections below to adjust the
scanner settings.
Selecting Driver Frequencies
Follow these steps to select the appropriate frequency for
each driver.
1. Press 0 in Scan mode, rotate the scroll control to
select the race, then press E.
2. Press CAR, enter the driver’s number, then press E.
Or press CAR, press E, rotate the scroll control to
select the driver, then press E.
3. Rotate the scroll control to select the driver’s
frequency. If the drivers frequency is not listed, select
NEW Frequency then enter the correct frequency.
4. Press Hold to set the selection.
Holding on a Car
Follow these steps to hold on a car within the currently-
selected racing system.
SC230 Paper OM 062206.fm Page 34 Friday, July 21, 2006 7:39 PM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden USC230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden USC230 in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info