647892
58
Zoom out
Zoom in
Previous page
1/63
Next page
User Defined Fleet Maps
Type I Programming Information
When a Type I system is designed, the address information for all the IDs is divided into 8 equal
sized blocks, numbered 0–7. When you program your scanner to track a Type I system, you must
select a size code for each of these blocks. When you have assigned a size code to all 8 blocks,
you’ll have defined the Fleet Map for the system you’re tracking. Each size code determines the
number of Fleets, Subfleets, and IDs each block will have. For example, a size code of S-4 has one
Fleet, which is divided into 16 separate Subfleets, and it has a total of 512 individual IDs.
When a block is assigned a size code, the Fleet or Fleets created within the block are assigned a
Type I ID. The way these IDs display on your scanner depend on the block number and the block’s
size code. When a Type I ID displays, the leftmost digit represents the block which contains the ID.
The next two digits identify which Fleet is active, and the last digit(s) identifies the Subfleet.
The details concerning how the size codes are selected by a Type I System designer are highly
dependent on the specific needs of the system’s users. Some organizations may want many
subfleets with only a few radios each, while another organization may want only a few subfleets with
many radios each. Your task is to program your fleet map with the same size code assignments as
the trunked system. If you do this accurately, you’ll track all the Fleet-Subfleet combinations used by
the system. In other words, you’ll hear complete communications while monitoring a trunked system.
Preset Map E1P13
Size Code
S3
S3
S11
S4
S4
S0
S0
Block
1
0
2
3
4
5
6
7S0
Preset Map E1P14
Size Code
S3
S4
S10
S4
S4
S4
S12
Block
1
0
2
3
4
5
6
7--
Preset Map E1P15
Size Code
S4
S4
S4
S11
S11
S0
S12
Block
1
0
2
3
4
5
6
7--
Preset Map E1P16
Size Code
S10
S3
S10
S11
S0
S0
S12
Block
1
0
2
3
4
5
6
7--
405-12
Block
(1 digit)
Subfleet
(1 or 2 digits)
Which Fleet
within the Block
(2 digits)
58
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC895XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC895XLT in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info