611012
44
Zoom out
Zoom in
Previous page
1/60
Next page
Remote Interface
You can communicate and program your UBC785XLT in numerous ways with peripheral
devices using the Remote Interface Cable port (the serial cable is optional). This radio offers
the following modes:
PC Control mode
Program and control your scanner from a PC using optional ARC785 software.
Clone mode
Clone all the frequencies into your scanner to another UBC785XLT.
PC Control Mode
To connect Scanner to PC:
Plug the scanner end of the RS232C straight cable into the remote port which is on the rear
of the scanner. Plug the other end of the cable (DB-9 serial connector) into a personal
computers serial port. A few PCs may require an adapter, most will not. Of course, make
sure your PC is turned ON.
To program your scanner:
You can program and control your scanner remotely from a PC using optional ARC785
software.
After connecting the scanner to a PC, turn the scanner ON.
To use the Remote (PC Control) mode, you must install optional ARC785 software and use
as directed. Make sure that your scanner is connected to the serial port of the PC using the
RS232C straight cable.
40
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 40
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info