611012

Uniden UBC785XLT Manual

26
Zoom out
Zoom in
Previous page
1/60
Next page
8:RECORD
You can flag any channel for recording using this menu function. Use your own
recording device plugged into the jack on the back of the scanner.
3:SYSTEM OPTION
1:DIMMER
Allows you to change the brightness of the display.
2:SCREEN MASK
Screen Mask allows you to limit what appears on the display to the alpha tags that
you have set for a channel along with a few function icons. Screen Mask removes the
frequency, receiving mode tone data and signal strength bars. This mode is
particularly useful in public safety vehicles where "information overload" is already a
problem. Screen Mask does not work in Search mode.
3:KEY BEEP
Use this function to turn OFF the keypad acknowledgement beep. The default setting
is
ON.
4:ENTER LOCK
Use Enter Lock to prevent accidental re-programming of channels, tone
(CTCSS/DCS) and talk groups entered into memory. The default setting is
OFF.
5:PC CONTROL
Use this function to set the transfer speed (baud rate) at which your personal
computer (PC) communicates with the scanner when downloading information into
your scanner using Uniden E-Scanner software. See page 40 for details.
6:CLONE
You can clone all the programming, including frequencies and alpha tags as well as
bank settings and other parameters from another UBC785XLT.
7:DATA SKIP
A scanner will normally stop on any transmission it receives. This means the
UBCD785D will occasionally stop on data signals and unmodulated transmissions.
You can automatically skip many of these types of transmissions during search.
8:SQ MODE
The SQ Mode allows you to set at your option, whether the scanner will stop on all
active transmissions on a particular frequency or it will only respond to transmissions
with a pre-set subaudible tone. This applies to both Conventional Search and Scan
modes. The options are as follows:
22
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 22
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info