611012
25
Zoom out
Zoom in
Previous page
1/60
Next page
Note: Through the System Menu you can set the radio to operate in Tone
Search mode during Search as well. In this mode, the radio will
automatically determine the active subaudible tone on any frequency
received during the search.
6:RECORD
With this feature set to on, any frequency that is active during the search, can
be recorded to an external tape recorder.
7:AUTO STORE
You can automatically store the active frequencies found during a search into
the memory. You can select the bank to program. The audio will be muted.
2:SCAN OPTION
1:FREQUENCY
Allows you to program a frequency to a memory channel or edit the frequencyl
already programmed. You can also set an alphanumeric text tag (alpha tag) for each
programmed frequencies.
2:DELAY
You can set delay for the memory channel. The default delay is two seconds.
3:TONE DATA
You can set a CTCSS (analog) or DCS (digital) subaudible tone for a frequency. To
do so you must have the SQ Mode in the System Menu set to Tone SQ. You can
also program a subaudible tone easily by pressing the
E key in Scan Hold mode after
programming a frequency. This will bring up the Tone Data menu without having to
navigate the Menu. By doing this you will receive all transmissions on the frequency,
regardless of the subaudible tone, except the one which you have locked. Any
transmissions with that tone will not be received.
4:BEEP ALERT
You can set a Beep Alert per channel to alert you when specific frequencies are
active. For example, you may wish to be alerted anytime a mutual aid fire frequency
is active. With Beep Alert, you will hear three beeps at the start of each transmission
that you have flagged as such. You will also notice that as you scroll pass the flagged
channel(s), you will hear three beeps.
5:ATTENUATOR
See 1: SEARCH OPTION/ 2:CHAIN SERACH/ 4:ATTENUATOR.
6:STEPS
Your UBCD785D is programmed with default step sizes for each frequency range
(see page 1). Steps are important if you are interested in using the
VFO to tune off
from a frequency programmed into memory or if you wish to program a frequency
that the default step size will not accept.
7:MODE
Default Auto receive modes are also programmed into memory. AM for aircraft for
example. You can change the default settings on a per-channel basis with this Menu
item.
21
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 21
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info