611012
22
Zoom out
Zoom in
Previous page
1/60
Next page
Basic Operation
Turn the Scanner On
Turn the VOL control clockwise out of the detent position. The scanner automatically starts
scanning. Since there are no frequencies programmed in your scanner initially, you may not
receive any signals. Once you set the squelch and program some frequencies, you will be
hearing conversations regularly.
Setting the Squelch
To set the squelch, you must be in the hold mode, and you should not be receiving a signal
on your scanner.
1. Press
/HOLD until you do not hear a signal.
2. Make sure that the
VOL is set to a comfortable
listening level.
3. Think of the Squelch Control as a gate.
Turn the
SQUELCH control fully counter-clockwise.
This raises the "Squelch Gate" so high that only very strong
signals can get through.
4. Turn
SQUELCH clockwise until you hear a hiss. This lowers the
"Squelch Gate" so that everything gets through noise, weak
signals, medium signals and strong signals.
5. Turn
SQUELCH back counter-clockwise just until the hiss stops.
Now the "Squelch Gate" allows only clear signals through.
18
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
NOISE
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
NOISE
STRONG SIGNALS
MEDIUM SIGNALS
WEAK SIGNALS
NOISE
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 18
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info