611012
19
Zoom out
Zoom in
Previous page
1/60
Next page
15
Applying Power for Vehicle Installation
You can power your scanner using either the supplied DC power cord or your vehicles
cigarette lighter socket using DC cigarette lighter power cord.
Caution: You must use a power source that supplies 13.8 V DC and delivers at least
700 mA. Your standard 12 V car battery should be sufficient. The cord
connectors center tip must be set to positive and its plug must fit the scanners
DC 13.8 V jack. The supplied DC power cord meets these specifications. Using a
power cord that does not meet these specifications could damage the scanner or
the adapter.
Always connect the adapter or DC power cord to the scanner before you connect it to the
power source. When you finish, disconnect the adapter or DC power cord from the power
source before you disconnect it from the scanner.
For added safety and to protect your scanner,
disconnect the cable from your vehicle batterys
negative (-) terminal before you begin.
Follow these steps to connect the supplied DC power cord.
1. Connect the power cords black wire to a chassis ground, such as a metal screw
attached to a metal part of the vehicles frame. Be sure that the screw is not insulated
from the frame by a plastic part.
2. Connect the power cords red wire (with in-line fuse) to a source
of voltage that turns on and off with the ignition switch, such as
a spare accessory terminal in your vehicles fuse box.
3. Insert the power cords barrel plug into the
DC 13.8 V jack
on the back of the scanner.
4. Reconnect the cable to the vehicle batterys negative (-)
terminal.
To power the scanner from a vehicles 12 V power source
(such as a cigarette-lighter socket), you need a cigarette-lighter
adapter.
To connect an optional DC cigarette-lighter power cable, insert its barrel plug into the
DC 13.8 V jack on the back of the scanner, then plug the power cable into your vehicles
cigarette lighter socket.
Note: If you use a cigarette-lighter power cable and your vehicles engine is running, you
might hear electrical noise from the engine while scanning. This is normal.
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 15
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC785XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC785XLT in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info