Using the Scanner Memories
Using the Scanner Memories
Your scanner has 300 memories you can store
frequencies into for scanning. The memories
are arranged in 10 banks of 30 memories each.
While scanning, you can quickly select which
bank to scan by pressing the number button
that corresponds to the bank you want to turn
on or off for scanning. To select the scanner
mode, slide the mode switch to Scanner.
Programming Memories
You will first need to determine the frequencies you want to program.
Make a list of the frequencies you want to program, then organize them
in up to 10 groups of 30 or fewer and fill out the table below. It always
helps to plan and organize what you want to do before you start, so don't
skip this important step. (The numbers in the left-hand columns below
correspond to your scanner’s memory numbers.)
Bank 1 Bank 2 Bank 3 Bank 4 Bank 5
1 1 1 1 1
2 2 2 2 2
3 3 3 3 3
4 4 4 4 4
5 5 5 5 5
6 6 6 6 6
7 7 7 7 7
8 8 8 8 8
9 9 9 9 9
10 10 10 10 10
11 11 11 11 11
12 12 12 12 12
13 13 13 13 13
14 14 14 14 14
15 15 15 15 15
16 16 16 16 16
17 17 17 17 17
18 18 18 18 18
19 19 19 19 19
20 20 20 20 20
21 21 21 21 21
22 22 22 22 22
23 23 23 23 23
24 24 24 24 24
25 25 25 25 25
26 26 26 26 26
27 27 27 27 27
28 28 28 28 28
29 29 29 29 29
30 30 30 30 30
