647639

Uniden UBC 100XLT Manual

10
Zoom out
Zoom in
Previous page
1/11
Next page
.. "
,~. '; ,:;'..
',. .
'-..
r
.,.,.._:;;:.,.::.;..;;:.~i.::ii::::"'~;'-:"~::';c.:::'
f-
a
\
Features'
. '
The following isa brief description of the operational features of the U8C 1OOXLT,
Manual Channel Selection -To manually select a channel press the manu.3! key
repeatedly until the desired channel number appears in the displ.3Y.Ifyou have
dese/ecred any of the b.3nks it will be impossible to access any of those ch.3nnels
manually until you have seleCTed the particular bank in which your channel existS.
Press and hold the manual key to rapidly step through the channels.
or
Press the channel number you wish to access. then press the manual key, The
scanner will automatically advance to the desired channel regardless of the bank
status.
L.odc:out - Se/ea the ch.3nnel to be skipped. Press the lockout: ,,<ey.The lockout:
indicator will appear in the display whenever that channel also appears. To take
lockout off press the lockout key on that channel.
Note: IfpriOrity ISseleCTed. channel 1will nor be able ca be lacked out. 1-\11other
priOrity channels may be lacked aut:.
Pnority- When it is Important to keep track ofrhe actNlty on one frequenojwhlle
listening to ot:hers. the prIOrIty funCTIon should be used. Program the ImporTant
frequenOj into the firs! channel of any bank. Press the pnonty key ca aCw3te the
prlonty funCTIon. Every 2 seconds the unIt wIll check the first channel of all
seleCTed banks far aCLJVlty(the priority IndicatOr wIll appear :n the cisp/ay). If a
transmISSion is found the unIt will monItOr that channeL Ifno signa/Is Found. the
unit wIll return ca the prevIous channel and functIon. Press the pnorIty key again
ca turn off the prIOrIty funalon.
Search - Use the search made ca look far new aCLJVefrequencIes wl~hln the bands
of your scanner
Enter the lower limIt frequency on the keypad and press the limit:'r<ey:
Enter the higher limit frequency and press the limIt: key again:
These tWo frequencIes set:the range that the unirwill search, Press the search key
co start searching. Ifan aCLNefrequency is found the scanner WIllsrop ca monItOr
the sIgnaL Press the hold key co hold the search on thIs frequenoj. Press the hold
key again co step up to the next frequency or press the limIt key co step dawn ca the
previous frequency. if you press and hold dawn either the Hold or LimIt keys. you
will rapidly step through the search frequencies. (Step up with the Hold key. and
step dawn with the Limit key.) When the signal stops or ifyou press the searc.r, key.
the unit will continue searching. Press the manual key to leave the search made.
Low Battery Indicator
The U8C 1OOXLThas a law barteryindicawrto leryou know when yourbattery
needs to be recharged. When the BATT Indicawr on the LCO display stam to
blink. it means that the barter; pack needs to be charged. Afrer the Iow battery
indicawr has been blinking far about ten mrnures, the scanner will shut Itself off
to pre'Jent the batterIes from becomIng comp/ere1y discharged. See the seCtIon of
this manu.31 on Battery Maintenance for mare informatIon.
...
;'... "..
… 10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden UBC 100XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden UBC 100XLT in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info