647977
12
Zoom out
Zoom in
Previous page
1/35
Next page
More user manuals on ManualsBase.com
8. Press /
ALERT
to change the display mode when
you program frequency or Alpha characters. Press and
hold /
ALERT
to set the Alert Beep function in
Manual mode.
9. Use /
CLR
to enter the decimal point when
programming a frequency into a channel. If you
make an entry error, press /
CLR
before the
key to erase the entry, and start over. Also, use
/
CLR
to clear the error message display.
10. Press to store a displayed frequency and Alpha
characters into any displayed channel.
11. Press to “Lock Out” or prevent scanning of the
displayed channel, including Priority Channels. (
L/O
appears on the display.) To unlock a channel, press
again. can be used in Scan or SEARCH
Modes.
12. There are 10 Preprogrammed NOAA weather
channels. Press /
ATT
to find the active NOAA
weather channel in your area.
WX
appears on the
display in Weather Mode. If you want to set or reset
the Attenuator function, press and hold /
ATT
.
13. Press to turn ON or OFF the automatic 2-second
delay during scanning or searching for active
frequencies. (When delay is activated,
DELAY
appears
on the display.) In this mode, when the scanner
monitors an active frequency, searching or scanning will
not resume until transmission stops for 2 seconds.
14. While Scanning, press /
TURBO
to activate the
PRIORITY SCAN function. (
PRIORITY
appears on the
display.) While Searching, press /
TURBO
to
toggle between 100 steps and 300 steps per second.
(When in TURBO SEARCH is activated. SEARCH
flashes on the display.)
15. Press and hold until
appears on the
display. This disables the keypad and VFO control
and prevents any accidental key entries. To enable
the keypad, press and hold
until
disappears from the display.
16. Press to turn the LCD Back light on and off.
Press and hold for 2 seconds to make the
scanner turn the LCD Back Light on when a
transmission is found (Auto Light function).
9
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden SC180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden SC180 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info