647756
21
Zoom out
Zoom in
Previous page
1/24
Next page
English - 21
Adapter and Battery Infor-
mation
AC Adapter (Base and Charger)
Part number PS-0035
Input voltage 120V AC, 60 Hz
Output voltage 8V AC @ 300mA
x Use only the supplied AC adapters.
x Use the proper adapter for the base & any
chargers.
x Do not place the unit in direct sunlight or
subject it to high temperatures.
Battery pack (with normal use)
Part number BT-1021
Capacity 300mAh, 2.4V DC
Talk time about 7 hours
Standby time about 7 days
Battery life about 1 year
x Replace the battery when the talk or
standby time becomes noticeably reduced.
For replacements, call the Parts Depart-
ment (see the front cover).
x When the battery gets low, the handset
beeps and shows a low battery alert;
recharge the battery.
Rechargeable Battery Warning
x is equipment contains a rechargeable
Nickel-Metal-Hydride (Ni-MH) battery.
x Nickel is a chemical known to the state of
California to cause cancer.
x Do not short-circuit the battery.
x e batteries in this equipment may
explode if disposed of in a re.
x Do not charge the batteries in any charger
other than the one specied in the owner's
manual. Using another charger may dam-
age the battery or cause it to explode.
x As part of our commitment to protecting
our environment and conserving natural
resources, Uniden voluntarily participates
in an RBRC® industry
program to collect and
recycle used Ni-MH
batteries within the
United States. Please
call 1-800-8-BATTERY
for information on Ni-
MH battery recycling in
your area. (RBRC® is a
registered trademark of the Rechargeable
Battery Recycling Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.
Warning! The cords on this product
and/or accessories contain lead,
a chemical known to the state of
California to cause birth defects
or other reproductive harm. Wash
hands after handling.
Uniden works to reduce lead
content in our products &
accessories.
Compliance Information
FCC Part 68 Information
is equipment complies with Part 68 of
the FCC rules and the requirements ad-
opted by the ACTA. On the bottom of this
equipment is a label that contains, among
other information, a product identier
in the format US: AAAEQ##TXXXX. If
requested, this number must be provided
to the phone company.
An applicable Universal Service Order
Codes (USOC) certication for the jacks
used in this equipment is provided (i.e.,
RJ11C) in the packaging with each piece
of approved terminal equipment. A plug
and jack used to connect this equipment
to the premises wiring and telephone
network must comply with the applicable
FCC Part 68 rules and requirements
adopted by the ACTA. A compliant tele-
phone cord and modular plug is provided
with this product. It is designed to be
connected to a compatible modular jack
that is also compliant. See installation
instructions for details.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden D1685 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden D1685 Series in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info