647754
10
Zoom out
Zoom in
Previous page
1/18
Next page
English - 10
1. With the phone in standby, press and hold
#
on any handset. The phone
prompts you to select the number of hours (
1
-
9
or
Always On
) that you
want it to stay in silent mode.
2. To confirm, press
#
or just wait about 5 seconds. The phone displays
Silent
Mode On
on each handset.
3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold
#
again.
Multihandset Features
# To use the features in this section, you need at least 2 handsets.
Your base supports a total of 12 cordless handsets: the one that came with
the base and up to 11 DCX160 accessory handsets. Your base also supports
a total of 2 DRX100 range extenders, including any that came with your
phone.
You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
Handsets that aren’t registered display a Not Registered message. For
registration instructions, see p. 14, or see the accessory handset manual.
If a handset was ever registered to a base, you must reset it before it can
register to a new base; see p. 14, or see the accessory handset manual.
Conference Calling
When an outside call comes in, two cordless handsets and the base can
join in a conference call with the outside caller.
To join a call that’s already in progress, just press
Talk/Flash
on the
handset.
To leave the conference call, hang up normally; the other stations remain
connected to the call.
Call Transfer
To... Press...
transfer a call
inTErcoM/clEar
. The phone puts the call on hold and
prompts you to select the handset you want to page.
When the other handset accepts the call, you'll be
disconnected (press
Talk/Flash
to rejoin the call).
cancel a transfer
Talk/Flash
to return to the call.
accept a
transferred call
inTErcoM/clEar
to answer the page and speak to the other
handset. Then, press
Talk/Flash
to speak to the caller.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden D1660 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden D1660 series in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info