647748
10
Zoom out
Zoom in
Previous page
1/14
Next page
10 - English
TROUBLESHOOTING
Problems Possible solutions
I can’t make or receive
calls.
x Check the telephone cord connection.
x Disconnect the base AC adapter. Wait a few minutes,
then reconnect it.
x Make sure the base is plugged in.
The handset won’t ring.
x Make sure the ringer is turned on.
The handset is not
working.
x Charge the battery for 15-20 hours.
x Check the battery connection.
The handset won’t display
CID information.
x Let calls ring twice before answering.
x Make sure your CID service is active.
I hear a beeping during
a call.
x The battery is getting low. Check the handset for a low
battery alert. Finish your conversation and return the
handset to the cradle as soon as possible.
There’s a lot of noise or
static on the line
x Check for interference from appliances (microwave
ovens, TVs, etc.) or wireless devices (baby monitors,
WiFi equipment, etc.). Move the handset or base away
from the interference source.
x Move the handset closer to the base.
x Turn the T-coil on for telecoil hearing aids (see p. 6).
Installing a Line Filter or DSL
Filter
x A telephone line filter or DSL filter
prevents services that use the phone
line from causing interference on
your phone. To get a line filter,
contact your service provider or
look in an electronics store.
x Plug the filter into the telephone
wall jack and plug the base into the
filter. Make a test call to make sure
the noise is gone.
Liquid Damage
CAUTION: If the base is covered in
liquid, disconnect the adapter and
phone cord from the wall before
touching it.
If the liquid is only on the exterior
housing of the base or handset, wipe
it off and use as normal. If you can
hear liquid inside the housing:
1. Remove all compartment covers,
and disconnect all cables and
cords.
2. If liquid is leaking from any vent
or hole, turn the phone so that
vent faces down. If not, place the
largest vent face down.
3. Let dry for at least 3 days. Check
for liquid inside the phone before
replacing compartment covers
and reconnecting cords.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden D1364 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden D1364 series in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info