121450
20
Zoom out
Zoom in
Previous page
1/30
Next page
.#--...--
--.--
--- .
!
Locking Out Chan nels
You may have programmed certain channels that you do not
want to hear every time you scan. These are channels that
are busy a major portion of the time, and the scanner stops at
the channel(s) often enough to interrupt the scan cycle. You
can lock Out those channels so they are not scanned.
1. Go directly to that channel using any of the methods
described above.
2. Press @. UQ appears at the lower right of the
display.
That channel is now "locked Out" of the scanning cycle.
However, you can access that channel at any time using one
of the Direct Channel Access methods.
To put the channel back In the scanning cycle:
1. Go directly to the desired channel.
2. Press @. The UQ indicator now disappears from
the display, and the channel is no longer "locked Out".
You can lock out any or all of the Priority Channels the same
way as other channels. If you lock out all Priority Channels
and you press C~) yoll will see this message.
BANK1
p ch
L DC Due
HOLD UO
If you want to put all the "locked-Out' channels of
an active bank back to the scanning cycle, press @
to put scanning on HOLD. Then press and hold @
key for about two seconds until you hear two beeps.
All channels are now returned to scanning cycle
except those that are empty (000. 000 MHz).
).
Looking for "Locked Out" Channels
During scanning, you will not see "locked Out" channels. To
look for "locked Out" channels, first press ~ to stop
scanning. Then use £ or. to step through the Bank. You
will see UQ" on the display to indicate a "locked Out" channel.
18
\-
--. -' _.--
.-""-----
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden Bearcat BC 220XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden Bearcat BC 220XLT in the language / languages: English as an attachment in your email.

The manual is 7,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Uniden Bearcat BC 220XLT

Uniden Bearcat BC 220XLT User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info