121450
14
Zoom out
Zoom in
Previous page
1/30
Next page
Operation Overview
Note: Before operating the USC 220XL T for the first time,
make sure you have fully charged the Battery Pack.
1. Before turning on the scanner, rotate the Squelch
Control fully clockwise.
2. Turn the scanner ON by rotating the On-OffNolume
Control clockwise until you hear a click. Turn the
Volume Control a small amount clockwise to a Iow
listening level.
3. You should hear either a "rushing" noise or some
communications. If you are monitoring a transmission,
wait until it stops before adjusting the Squelch Control.
4. Readjust the volume to a comfortable listening level.
5. Turn the Squelch Control counterclockwise just until the
rushing noise disappears. At the squelch threshold,
any incoming signal just slightly stronger than the noise
will open the squelch. Any communication that is
received will open the Squelch, and stop scanning or
Searching.
Note: If squelch is set too tight, that is, too far
counterclockwise from the threshold point, a much
stronger signal is required to open the squelch. If squelch
is set on a point clockwise from the threshold, you will hear
a constant sound (noise, if no signal is present.) The
scanner will not scan.
The UBC 220XL T has 200 memory channels, each of which
can be programmed to store one frequency. The channels are
divided into ten 20-channel banks, useful for storing similar
frequencies in order to maintain faster scanning cycles.
You can monitor communication in one of two ways:
. SCAN If you have programmed channels, you can
scan all programmed channels in the selected bank(s),
except locked out channels. When scanning stops on
an active frequency, it remains on that channel as long
as the transmission continues. When the transmission
stops, the UBC 220XL T resumes scanning. If the Delay
Mode ISon, the scanner remains on the same channel
for 2 more seconds, waiting for a responding
transmission. If there is no responding transmission
within 2 seconds, the scanning cycle resumes.
Any channels that are not programmed (000.0000) are
skipped during scan.
12
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uniden Bearcat BC 220XLT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uniden Bearcat BC 220XLT in the language / languages: English as an attachment in your email.

The manual is 7,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Uniden Bearcat BC 220XLT

Uniden Bearcat BC 220XLT User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info